ExamBro
ExamBro
Topic JEE Mains · Physics · STD 12 - Semicondutor electronics

Junction Transistor PYQs: JEE Mains Physics

32 STD 12 - Semicondutor electronics questions on Junction Transistor, asked from 2013–2023.

32questions
181in STD 12 - Semicondutor electronics
2013–2023years
Difficulty mix
Easy 6% Medium 63% Hard 31%

Questions

Newest first

Showing 1–32 of 32 questions

  1. 1. For a given transistor amplifier circuit in \(CE\) configuration \(V_{C C}=1 V , R_c=1 k \Omega, R_b=100 k \Omega\) and \(\beta=100\). Value of base current \(I_b\) is
    2023 Medium
  2. 2. From the given transfer characteristic of a transistor in \(CE\) configuration, the value of power gain of this configuration is \(10^{ x }\), for \(R_B=10\,k \Omega\), and \(R _C=1\,k \Omega\). The value of \(x\) is \(.....\).
    2023 Hard
  3. 3. In an \(n-p-n\) common emitter (\(CE\)) transistor the collector current changes from \(5\,mA\) to \(16\,mA\) for the change in base current from \(100\,\mu A\) and \(200\,\mu A\), respectively. The current gain of transistor is 2023 Easy
  4. 4. A transistor is used in an amplifier circuit in common emitter mode. If the base current changes by \(100 \,\mu A\), it brings a change of \(10 \,mA\) in collector current. If the load resistance is \(2 \,k \Omega\) and input resistance is \(1 \,k \Omega\), the value of power gain is \(x \times 10^{4}\). The value of \(x\) is_________ 2022 Medium
  5. 5. A transistor is used in common-emitter mode in an amplifier circuit. When a signal of \(10\, mV\) is added to the base-emitter voltage, the base current changes by \(10 \mu A\) and the collector current changes by \(1.5 \,mA\). The load resistance is \(5 \,k \Omega\). The voltage gain of the transistor will be 2022 Medium
  6. 6. An \(n.p.n\) transistor with current gain \(\beta=100\) in common emitter configuration is shown in figure. The output voltage of the amplifier will be\(.....V\)
    2022 Medium
  7. 7. For a constant collector-emitter voltage of \(8\,V\), the collector current of a transistor reached to the value of \(6\,mA\) from \(4\,mA\), whereas base current changed from \(20\,\mu A\) to \(25\,\mu\,A\) value. If transistor is in active state, small signal current gain (current amplification factor) will be. 2022 Medium
  8. 8. For a transistor to act as a switch, it must be operated in 2022 Medium
  9. 9. Given below are two statements : One is labelled as Assertion \(A\) and the other is labelled as Reason \(R\). Assertion \(A\) : \(n - p - n\) transistor permits more current than a \(p-n-p\) transistor Reason \(R\) : Electrons have greater mobility as a charge carrier Choose the correct answer from the options given below 2022 Medium
  10. 10. In an experiment of \(CE\) configuration of \(n-p-n\) transistor, the transfer characteristics are observed as given in figure. If the input resistance is \(200 \Omega\) and output resistance is \(60 \Omega\) the voltage gain in this experiment will be..........
    2022 Medium
  11. 11. The positive feedback is required by an amplifier to act an oscillator. The feedback here means ........... 2022 Medium
  12. 12. The typical transfer characteristic of a transistor in \(CE\) configuration is shown in figure. A load resistor of \(2\,k\Omega\) is connected in the collector branch of the circuit used. The input resistance of the transistor is \(0.50\,k \Omega\). The voltage gain of the transistor is.
    2022 Hard
  13. 13. A circuit is arranged as shown in figure. The output voltage \({V}_{0}\) is equal to \(\ldots \ldots . {V}\).
    2021 Hard
  14. 14. A common transistor radio set requires \(12\,V (D.C.)\) for its operation. The \(D.C.\) source is constructed by using a transformer and a rectifier circuit, which are operated at \(220\, V\) \((A.C.)\) on standard domestic \(A.C.\) supply. The number of turns of secondary coil are \(24,\) then the number of turns of primary are 2021 Medium
  15. 15. A trransistor is connected in common emitter circuit configuration, the collector supply voltage is \(10 \,{V}\) and the voltage drop across a resistor of \(1000\, \Omega\) in the collector circuit is \(0.6\, {V}\). If the current gain factor \((\beta)\) is \(24\) , then the base currect is \(....\,\mu\) \(A.\) (Round off to the Nearest Integer) 2021 Hard
  16. 16. An \(npn\) transistor operates as a common emitter amplifier with a power gain of \(10^{6} .\) The input circuit resistance is \(100\, \Omega\) and the output load resistance is \(10\, K \Omega\). The common emitter current gain ' \(\beta\) ' will be............. (Round off to the Nearest Integer) 2021 Medium
  17. 17. Given below are two statements: Statement \(I :\) \(PN\) junction diodes can be used to function as transistor, simply by connecting two diodes, back to back, which acts as the base terminal. Statement \(II :\) In the study of transistor, the amplification factor \(\beta\) indicates ratio of the collector current to the base current. In the light of the above statements, choose the correct answer from the options given below : 2021 Medium
  18. 18. If an emitter current is changed by \(4\, mA ,\) the collector current changes by \(3.5\, mA\). The value of \(\beta\) will be 2021 Medium
  19. 19. The typical output characteristics curve for a transistor working in the common-emitter configuration is shown in the figure. The estimated current gain from the figure is
    2021 Medium
  20. 20. The output characteristics of a transistor is shown in the figure. When \(V_{C E}\) is \(10\, V\) and \(I_{ C }=4.0\, mA ,\) then value of \(\beta_{ ac }\) is
    2020 Medium
  21. 21. A common emitter amplifier circuit, built using an \(npn\) transistor, is shown in the figure. Its \(dc\) current gain is \(250\), \(R_C = 1\,k\, \Omega \) and \(V_{CC} = 10\,V\). What is the minimum base current for \(V_{CE}\) to reach saturation?.........\(\mu A\)
    2019 Medium
  22. 22. An \(NPN\) transistor is used in common emitter configuration as an amplifier with \(1\,k\Omega \) load resistance. Signal voltage of \(10\,mV\) is applied across the base emitter. This produces a \(3\,mA\) change in the collector current and \(15\,\mu A\) change in the base current of the amplifier. The input resistance and voltage gain are 2019 Hard
  23. 23. An \(npn\) transistor operates as a common emitter amplifier, with a power gain of \(60\, dB\). The input circuit resistance Is \(100\,\Omega \) and the output load resistance is \(10 \,k\,\Omega \). the common emitter current gain \(\beta \) is 2019 Hard
  24. 24. In the figure, given that \(V_{BB}\) supply can vary from \(0\) to \(5.0 \,V,\,\,V_{CC} = 5\,V,\) \(\beta _{dc} = 200,\,\,R_B = 100,\,k\Omega ,\) \(R_C = 1\,k\Omega  \) an \(V_{BE} = 1.0\,V,\) The minimum base current and the input voltage at which the transistor will go to saturation, will be respectively
    2019 Hard
  25. 25. The transfer characteristic curve of a transistor, having input and output resistance \(100\,\Omega \) and \(100\,k\Omega \) respectively, is shown in the figure. The Voltage and Power gain, are respectively
    2019 Hard
  26. 26. In a common emitter configuration with suitable bias, it is given than \(R_L\) is the load resistance and \(R_{BE}\)  is small signal dynamic resistance (input side). Then, voltage gain, current gain and power gain are given, respectively, by: [ \(\beta \) is current gain, \(I_B\) , \(I_C\) , \(I_E\) are respectively base, collector and emitter currents] 2018 Hard
  27. 27. In a common emitter amplifier circuit using an \(n-p-n\) transistor, the phase difference between the input and the output voltages will be.....\(^o\) 2017 Easy
  28. 28. The current gain of a common emitter amplifier is \(69\). If the emitter current is \(7.0\,mA\), collector current is.....\(mA\) 2017 Medium
  29. 29. An unknown transistor needs to be identified as a \(npn\)  or  \(pnp\) type. A multimeter, with \(+ve\) and \(-ve\)  terminals, is used to measure resistance between different terminals of transistor. If terminal \(2\) is the base of the transistor then which of the following is correct for a \(pnp\) transistor? 2016 Medium
  30. 30. The ratio \((R)\) of output resistance \(r_0\), and the input resistance \(r_i\) in measurements of input and output characteristics of a transistor is typically in the range 2016 Medium
  31. 31. An \(n-p-n\) transistor has three leads \(A,B\) and \(C\) . Connecting \(B\) and \(C\) by moist fingers, \(A\) to the positive lead of an ammeter, and \(C\) to the negative lead of the ammeter, one finds large deflection. Then, \(A, B\) and \(C\) refer respectivily to 2014 Medium
  32. 32. Consider two \(npn\) transistors as shown in figure. If \(0\,Volts\) corresponds to false and \(5\, Volts\) correspond to true then the output at \(C\) corresponds to
    2013 Hard

Other STD 12 - Semicondutor electronics topics

Frequently asked

How many Junction Transistor questions came in JEE Mains?

32 questions from 2013–2023, each with the correct answer and a full solution.

How difficult are Junction Transistor questions?

6% are easy, 63% medium and 31% hard.