ExamBro
ExamBro
Topic JEE Mains · Physics · STD 11 - Surface tension

Excess Pressure PYQs: JEE Mains Physics

18 STD 11 - Surface tension questions on Excess Pressure, asked from 2014–2025.

18questions
62in STD 11 - Surface tension
2014–2025years
Difficulty mix
Easy 11% Medium 22% Hard 67%

Questions

Newest first

Showing 1–18 of 18 questions

  1. 1. An air bubble of radius 0.1 cm lies at a depth of 20 cm below the free surface of a liquid of density \(1000 \mathrm{~kg} / \mathrm{m}^3\). If the pressure inside the bubble is \(2100 \mathrm{~N} / \mathrm{m}^2\) greater than the atmospheric pressure, then the surface tension of the liquid in SI unit is (use \(\mathrm{g}=10 \mathrm{~m} / \mathrm{s}^2\) ) 2025 Hard
  2. 2. An air bubble of radius 1.0 mm is observed at a depth of 20 cm below the free surface of a liquid having surface tension \(0.095 \mathrm{~J} / \mathrm{m}^2\) and density \(10^3 \mathrm{~kg} / \mathrm{m}^3\). The difference between pressure inside the bubble and atmospheric pressure is _____ \(\mathrm{N} / \mathrm{m}^2\). (Take \(\mathrm{g}=10 \mathrm{~m} / \mathrm{s}^2\) ) 2025 Medium
  3. 3. The excess pressure inside a soap bubble A in air is half the excess pressure inside another soap bubble B in air. If the volume of the bubble A is \(n\) times the volume of the bubble \(B\), then, the value of \(n\) is ___. 2025 Easy
  4. 4. Two soap bubbles of radius 2 cm and 4 cm , respectively, are in contact with each other. The radius of curvature of the common surface, in cm , is ______ . 2025 Easy
  5. 5. A liquid column of height \(0.04 \mathrm{~cm}\) balances excess pressure of soap bubble of certain radius. If density of liquid is \(8 \times 10^3 \mathrm{~kg} \mathrm{~m}^{-3}\) and surface tension of soap solution is \(0.28 \mathrm{Nm}^{-1}\), then diameter of the soap bubble is _______ \(\mathrm{cm}\). \(\text { (if } g=10 \mathrm{~ms}^{-2} \text { ) }\) 2024 Hard
  6. 6. Pressure inside a soap bubble is greater than the pressure outside by an amount _______. (given : \(\mathrm{R}=\) Radius of bubble, \(\mathrm{S}=\) Surface tension of bubble) 2024 Hard
  7. 7. The excess pressure inside a soap bubble is thrice the excess pressure inside a second soap bubble. The ratio between the volume of the first and the second bubble is _______. 2024 Hard
  8. 8. There is an air bubble of radius \(1.0\,mm\) in a liquid of surface tension \(0.075\,Nm ^{-1}\) and density \(1000\,kg\) \(m ^{-3}\) at a depth of \(10\,cm\) below the free surface. The amount by which the pressure inside the bubble is greater than the atmospheric pressure is \(....Pa \left( g =10\,ms ^{-2}\right)\) 2023 Hard
  9. 9. A spherical soap bubble of radius \(3\,cm\) is formed inside another spherical soap bubble of radius \(6\,cm\). If the internal pressure of the smaller bubble of radius \(3\,cm\) in the above system is equal to the internal pressure of the another single soap bubble of radius \(r\,cm\). The value of \(r\) is....... 2022 Hard
  10. 10. A soap bubble of radius \(3\, {cm}\) is formed inside the another soap bubble of radius \(6\, {cm}\). The radius of an equivalent soap bubble which has the same excess pressure as inside the smaller bubble with respect to the atmospheric pressure is .......... \({cm}\) 
    2021 Hard
  11. 11. Two narrow bores of diameter \(5.0\, {mm}\) and \(8.0\, {mm}\) are joined together to form a \(U-\)shaped tube open at both ends. If this \({U}\)-tube contains water, what is the difference in the level of two limbs of the tube. [Take surface tension of water \({T}=7.3 \times 10^{-2} \, {Nm}^{-1}\), angle of contact \(=0, {g}=10\, {ms}^{-2}\) and density of water \(\left.=1.0 \times 10^{3} \,{kg} \,{m}^{-3}\right]\) (in \(mm\)) 2021 Hard
  12. 12. When two soap bubbles of radii \(a\) and \(b ( b > a )\) coalesce, the radius of curvature of common surface is 2021 Hard
  13. 13. Pressure inside two soap bubbles are \(1.01\) and \(1.02\) atmosphere, respectively. The ratio of their volumes is 2020 Medium
  14. 14. A small soap bubble of radius \(4\,cm\)  is trapped inside another bubble of radius \(6\,cm\) without any contact. Let \(P_2\)  be the pressure inside the inner bubble and \(P_0\)  the pressure outside the outer bubble. Radius of another bubble with pressure difference \(P_2 - P_0\)  between its inside and outside would be....... \(cm\) 2018 Hard
  15. 15. When an air bubble of radius \(r\) rises from the bottom to the surface of a lake, its radius becomes \(\frac{{5r}}{4}\).Taking the atmospheric pressure to be equal to \(10\,m\) height of water column, the depth of the lake would approximately be ....... \(m\) (ignore the surface tension and the effect of temperature) 2018 Hard
  16. 16. If two glass plates have water between them and are separated by very small distance ( see figure), it is very difficult to pull them apart. It is because the water in between forms cylindrical surface on the side that gives rise to lower pressure in the water in comparison to atmosphere. If the radius of the cylindrical surface is \(R\) and surface tension of water is \(T\) then the pressure in water between the plates is lower by
    2015 Medium
  17. 17. An air bubble of radius \(0 .1\, cm\) is in a liquid having surface tension \(0.06\, N/m\) and density \(10^3\, kg/m^3\). The pressure inside the bubble is \(1100\, Nm^{-2}\) greater than the atmospheric pressure. At ....... \(m\) depth is the bubble below the surface of the liquid ? \((g\, = 9.8\, ms^{- 2})\) 2014 Medium
  18. 18. Two soap bubbles coalesce to form a single bubble. If \(V\) is the subsequent change in volume of contained air and \(S\) change in total surface area, \(T\) is the surface tension and \(P\) atmospheric pressure, then which of the following relation is correct? 2014 Hard

Other STD 11 - Surface tension topics

Frequently asked

How many Excess Pressure questions came in JEE Mains?

18 questions from 2014–2025, each with the correct answer and a full solution.

How difficult are Excess Pressure questions?

11% are easy, 22% medium and 67% hard.