Questions
Newest firstShowing 1–9 of 9 questions
- 1. A \(1\) kg block subjected to two simultaneous forces \((2\hat{i} + 3\hat{j} + 4\hat{k})\) N and \((3\hat{i} - \hat{j} - 2\hat{k})\) N is moved a distance of \(25\) m along \((3\hat{i} - 4\hat{j})\) direction. The work done in this process is _____ J. 2026 Medium
- 2. A body of mass 2 kg is moving along x -direction such that its displacement as function of time is given by \(x ( t )=\alpha t ^2+\beta t +\gamma m\), where \(\alpha=1 m / s ^2\), \(\beta=1 m / s\) and \(\gamma=1 m\). The work done on the body during the time interval \(t =2 s\) to \(t =3 s\), is _________ J. 2026 Easy
- 3. A mass of \(1\text{ kg}\) is kept on an inclined plane with \(30°\) inclination with respect to horizontal plane and it is at rest initially. Then the whole assembly is moved up with constant velocity of \(4\text{ m/s}\). The work done by the frictional force in time \(2\text{ s}\) is _______ J. (Take \(g = 10\text{ m/s}^2\)) 2026 Medium
- 4. A block of mass 25 kg is pulled along a horizontal surface by a force at an angle \(45^{\circ}\) with the horizontal. The friction coefficient between the block and the surface is 0.25. The displacement of 5 m of the block is: 2025 Medium
- 5. A force \(\overrightarrow{\mathrm{F}}=2 \hat{i}+\mathrm{b} \hat{j}+\hat{k}\) is applied on a particle and it undergoes a displacement \(\hat{i}-2 \hat{j}-\hat{k}\). What will be the value of \(b\), if work done on the particle is zero. 2025 Easy
- 6. A block of mass \(1 \mathrm{~kg}\) is pushed up a surface inclined to horizontal at an angle of \(60^{\circ}\) by a force of \(10 \mathrm{~N}\) parallel to the inclined surface as shown in figure. When the block is pushed up by \(10 \mathrm{~m}\) along inclined surface, the work done against frictional force is _______. \(\left[\mathrm{g}=10 \mathrm{~m} / \mathrm{s}^2\right]\)
2024 Hard - 7. A block of mass \(100 \mathrm{~kg}\) slides over a distance of \(10 \mathrm{~m}\) on a horizontal surface. If the co-efficient of friction between the surfaces is \(0.4\) , then the work done against friction (in \(\mathrm{J}\) ) is : 2024 Hard
- 8. A small particle moves to position \(5 \hat{i}-2 \hat{j}+\hat{k}\) from its initial position \(2 \hat{i}+3 \hat{j}-4 \hat{k}\) under the action of force \(5 \hat{i}+2 \hat{j}+7 \hat{k} N\). The value of work done will be \(............J\). 2023 Easy
- 9. Two persons \(A\) and \(B\) perform same amount of work in moving a body through a certain distance \({d}\) with application of forces acting at angle \(45^{\circ}\) and \(60^{\circ}\) with the direction of displacement respectively. The ratio of force applied by person \(A\) to the force applied by person \(B\) is \(\frac{1}{\sqrt{x}}\). The value of \(x\) is ...... . 2021 Medium
No questions on this page match these filters.
Other STD 11 - Work,energy,power and collision topics
- 37Qs Work-Energy Theorem
- 20Qs Power
- 7Qs Conservation of Energy and Momentum
- 10Qs Vertical Circular Motion
- 3Qs Conservative and Non-Conservative
- 14Qs Perfectly Inelastic Collision
- 11Qs Work Done by Spring and Potential Energy of Spring
- 33Qs Elastic and Inelastic collision
- 11Qs Potential Energy
- 14Qs Work Done by Variable Force
- 22Qs Kinetic Energy
Frequently asked
How many Work Done by Constant Force questions came in JEE Mains?
9 questions from 2021–2026, each with the correct answer and a full solution.
How difficult are Work Done by Constant Force questions?
33% are easy, 44% medium and 22% hard.