JEE Mains · Physics · STD 11 - Work,energy,power and collision
- JEE Mains 2024
- Hard
- MCQ
A body of mass \(50 \mathrm{~kg}\) is lifted to a height of \(20 \mathrm{~m}\) from the ground in the two different ways as shown in the figures. The ratio of work done against the gravity in both the respective cases will be _______.

Pick an option to check your answer.
Answer & Solution
Correct Answer
(A) \(1: 1\)
Step-by-step Solution
Detailed explanation
Work done by gravity is independent of path. It depends only on vertical displacement so work done in both cases will be same.
Option \((1)\) is correct
More questions from Physics
- A boy’s catapult is made of rubber cord which is \(42\, cm\) long, with \(6\, mm\) diameter of cross -section and of negligible mass. The boy keeps a stone weighing \(0.02\, kg\) on it and stretches the cord by \(20\, cm\) by applying a constant force. When released, the stone flies off with a velocity of \(20\, ms^{-1}\). Neglect the change in the area of cross section of the cord while stretched. The Young’s modulus of rubber is closest toJEE Mains 2019 Medium
- Two planets \(A\) and \(B\) of equal mass are having their period of revolutions \(T_{A}\) and \(T_{B}\) such that \(T_{A}=2 T_{B}\). These planets are revolving in the circular orbits of radii \(I_{A}\) and \(I_{B}\) respectively. Which out of the following would be the correct relationship of their orbits?JEE Mains 2022 Medium
- A transverse wave is represented by \(y=2 \sin\) \((\omega t - kx ) cm\). The value of wavelength (in \(cm\) ) for which the wave velocity becomes equal to the maximum particle velocity, will be.JEE Mains 2022 Medium
- Both the diodes used in the circuit shown are assumed to be ideal and have negligible resistance when these are forward biased. Built in potential in each diode is \(0.7\; \mathrm{V} .\) For the input voltages shown in the figure, the voltage (in \(Volts\)) at point \(A\) is
JEE Mains 2020 Medium - An electric toaster has resistance of \(60\ \Omega\) at room temperature \(\left(27^{\circ} \mathrm{C}\right)\). The toaster is connected to a \(220 \mathrm{~V}\) supply. If the current flowing through it reaches \(2.75 \mathrm{~A}\), the temperature attained by toaster is around _______. (if \(\alpha=2 \times 10^{-4} /{ }^{\circ} \mathrm{C}\) )JEE Mains 2024 Hard
- A parallel plate capacitor has capacitance C , when there is vacuum within the parallel plates.
A sheet having thickness \(\left(\frac{1}{3}\right)^{ rd }\) of the separation between the plates and relative permittivity K is introduced between the plates. The new capacitance of the system is :JEE Mains 2026 Medium
More PYQs from JEE Mains
- An electric dipole is placed on \({x}\)-axis in proximity to a line charge of linear charge density \(3.0 \times 10^{-6}\, {C} / {m}\). Line charge is placed on \(z-\)axis and positive and negative charge of dipole is at a distance of \(10\, {mm}\) and \(12\, {mm}\) from the origin respectively. If total force of \(4\, {N}\) is exerted on the dipole, find out the amount of positive or negative charge of the dipole.JEE Mains 2021 Hard
- If the length of the pendulum in pendulum clock increases by \(0.1\, \%\), then the error in time per day is: (in \(s\))JEE Mains 2021 Hard
- The initial pressure and volume of an ideal gas are \(P_0\) and \(V_0\). The final pressure of the gas when the gas is suddenly compressed to volume \(\frac{ V _0}{4}\) will be (Given \(\gamma=\) ratio of specific heats at constant pressure and at constant volume)JEE Mains 2023 Medium
- The following logic gate is equivalent to
JEE Mains 2021 Medium - Two blocks of masses \(m\) and \(M\) are connected by means of a metal wire of cross-sectional area \(A\) passing over a frictionless fixed pulley as shown in the figure. The system is then released. If \(M = 2\, m\), then the stress produced in the wire is
JEE Mains 2013 Hard - The distance between an object and a screen is \(100\, cm .\) A lens can produce real image of the object on the screen for two different positions between the screen and the object. The distance between these two positions is \(40\, cm .\) If the power of the lens is close to \(\left(\frac{ N }{100}\right) D\) where \(N\) is an integer, the value of \(N\) is.......JEE Mains 2020 Hard