A \(2 \mathrm{~kg}\) brick begins to slide over a surface which is inclined at an angle of \(45^{\circ}\) with respect to horizontal axis. The co-efficient of static friction between their surfaces is _______.

For an object placed at a distance \(2.4\,m\) from a lens, a sharp focused image is observed on a screen placed at a distance \(12\,cm\) from the lens. A glass plate of refractive index \(1.5\) and thickness \(1\,cm\) is introduced between lens and screen such that the glass plate plane faces parallel to the screen. By what distance should the object be shifted so that a sharp focused image is observed again on the screen \(\dots\,m\)

The ratio of the power of a light source \(S_1\) to that the light source \(S_2\) is \(2 . S_1\) is emitting \(2 \times 10^{15}\) photons per second at 600 nm . If the wavelength of the source \(S_2\) is 300 nm , then the number of photons per second emitted by \(S_2\) is _______ \(\times 10^{14}\).

The initial speed of a bullet fired from a rifle is \(630\, m/s\). The rifle is fired at the centre of a target \(700\, m\) away at the same level as the target. How far above the center of the target (in \(m\)) the rifle must be aimed in order to hit the target? (Take \(g=10 \;m/s^2\))

Match List-I with List-II.

List-I (Relation)		List-II (Law)
A.	\(\oint \overrightarrow{ E } \cdot \overrightarrow{ d } l =-\frac{ d }{ dt } \oint \overrightarrow{ B } \cdot \overrightarrow{ d a}\)	I.	Ampere's circuital law.
B.	\(\oint\) B. \(\vec{d} l=\mu_0\left(1+\epsilon_0 \frac{d \phi_E}{d t}\right)\)	II.	Faraday's laws of electromagnetic induction.
C.	\(\oint \overrightarrow{ E } . \overrightarrow{ d a}=\frac{1}{\epsilon_0} \int \rho dv\)	III.	Ampere-Maxwell law
D.	\(\oint \overrightarrow{ B } \cdot \overrightarrow{ d } l =\mu_0 I\)	IV.	Gauss's law of electrostatics

Choose the correct answer from the options given below :

A block of mass \(1 \mathrm{~kg}\) is pushed up a surface inclined to horizontal at an angle of \(60^{\circ}\) by a force of \(10 \mathrm{~N}\) parallel to the inclined surface as shown in figure. When the block is pushed up by \(10 \mathrm{~m}\) along inclined surface, the work done against frictional force is _______. \(\left[\mathrm{g}=10 \mathrm{~m} / \mathrm{s}^2\right]\)

Assuming the experimental mass of \({}^{12}_{6}C\) as \(12\text{ u}\), the mass defect of \({}^{12}_{6}C\) atom is _______ \(\text{MeV}/c^2\).
(Mass of proton \(= 1.00727\text{ u}\), mass of neutron \(= 1.00866\text{ u}\), \(1\text{ u} = 931.5\text{ MeV}/c^2\) and \(c\) is the speed of the light in vacuum).

The relation between time ' \(t\) ' and distance ' \(x\) ' is \(t=\) \(\alpha x^2+\beta x\), where \(\alpha\) and \(\beta\) are constants. The relation between acceleration \((a)\) and velocity \((v)\) is _______.

A square loop of area \(25\,cm ^2\) has a resistance of \(10\,\Omega\). The loop is placed in uniform magnetic field of magnitude \(40.0 T\). The plane of loop is perpendicular to the magnetic field. The work done in pulling the loop out of the magnetic field slowly and uniformly in \(1.0 sec\), will be \(..........\times 10^{-3}\)

A 4.0 cm long straight wire carrying a current of 8A is placed perpendicular to an uniform magnetic field of strength 0.15 T. The magnetic force on the wire is ______ mN.

A square loop of side \(2a\) and carrying current I is kept in \(xz\) plane with its centre at origin. A long wire carrying the same current I is placed parallel to \(z-\)axis and passing through point \((0, b , 0),( b >> a ) .\) The magnitude of torque on the loop about \(z-\)ax is will be