JEE Mains · Physics · STD 12 -Electromagnetic induction
- JEE Mains 2021
- Medium
- MCQ
For the given circuit, comment on the type of transformer used:

Pick an option to check your answer.
Answer & Solution
Correct Answer
(C) Step-up transformer
Step-by-step Solution
Detailed explanation
\(V _{ S }=\frac{ P }{ i }=\frac{60}{0.11}=545.45\)
\(V _{ P }=220\)
\(V _{ S } > V _{ P }\)
\(\Rightarrow\) Step up transformer
More questions from Physics
- A cylinder of fixed capacity of \(44.8 \,litres\) contains helium gas at standard temperature and pressure. The amount of heat needed to raise the temperature of gas in the cylinder by \(20.0^{\circ} C\) will be .............. \(J\)(Given gas constant \(R =8.3 \,JK ^{-1}- moI ^{-1}\) )JEE Mains 2022 Medium
- The value of current I in the electrical circuit as given below, when potential at A is equal to the potential at B, will be ____ A.
JEE Mains 2025 Medium - Two satellite \(A\) and \(B\) go round a planet in circular orbits having radii \(4 R\) and \(R\) respectively. If the speed of \(\mathrm{A}\) is \(3 v\), the speed of \(\mathrm{B}\) will be _______.JEE Mains 2024 Hard
- The decay constant for a radioactive nuclide is \(1.5 \times 10^{-5} s ^{-1}\). Atomic of the substance is \(60\,g\) mole \(^{-1},\left( N _{ A }=6 \times 10^{23}\right)\). The activity of \(1.0\,\mu g\) of the substance is \(.......\,\times 10^{10}\,Bq\)JEE Mains 2023 Hard
- A body is projected from the ground at an angle of \(45^{\circ}\) with the horizontal. Its velocity after \(2s\) is \(20 \,ms ^{-1}\). The maximum height reached by the body during its motion is \(m\). (use \(g =10\, ms ^{-2}\) )JEE Mains 2022 Hard
- The equivalent resistance between points \(A\) and \(B\) in the given network is ............ \(\Omega\)
JEE Mains 2022 Medium
More PYQs from JEE Mains
- A projectile is projected at \(30^{\circ}\) from horizontal with initial velocity \(40\,ms ^{-1}\). The velocity of the projectile at \(t =2\,s\) from the start will be \(........\) (Given \(g =10\,m / s ^2\) )JEE Mains 2023 Hard
- A current carrying circular loop of radius \(2\) cm with unit normal \(\hat{n} = \dfrac{\hat{k}+\hat{i}}{\sqrt{2}}\) is placed in a magnetic field, \(\vec{B} = B_0(3\hat{i}+2\hat{k})\). If \(B_0 = 4\times 10^{-3}\) T and current \(I=100\sqrt{2}\) A, the torque experienced by the loop is ________ Wb·A. (\(\pi=3.14\))JEE Mains 2026 Hard
- A wire of length \(L\) and radius \(r\) is clamped rigidly at one end. When the other end of the wire is pulled by a force \(F\), its length increases by \(5\,cm\). Another wire of the same material of length \(4 L\) and radius \(4\,r\) is pulled by a force \(4\,F\) under same conditions. The increase in length of this wire is \(....cm\).JEE Mains 2022 Hard
- The vertical component of the earth's magnetic field is \(6 \times 10^{-5} T\) at any place where the angle of dip is \(37^{\circ}\). The earth's resultant magnetic field at that place will be \(\left(\right.\) Given \(\left.\tan 37^{\circ}=\frac{3}{4}\right)\)JEE Mains 2022 Easy
- If the ratio of lengths, radii and Young's moduli of steel and brass wires in the figure are \(a, b\) and \(c\) respectively, then the corresponding ratio of increase in their lengths is
JEE Mains 2013 Hard - A uniform solid cylinder with radius \(R\) and length L has moment of inertia \(I_1\), about the axis of cylinder. A concentric solid cylinder of radius \(R^{\prime}=\frac{R}{2}\) and length \(L^{\prime}=\frac{L}{2}\) is caned out of the original cylinder. If \(I_2\) is the moment of inertia of the carved out portion ot the cylinder then \(\frac{I_1}{I_2}=..........\) (Both \(I_1\) and \(I_2\) are about the axis of the cylinder)JEE Mains 2023 Medium