TS EAMCET · Physics · Semiconductors
Three logic gates are connected as shown in the figure. If the inputs are \(A=1\) and \(B=1\), then the values of \(y_1\) and \(y_2\) respectively are
- A 0,0
- B 0,1
- C 1,0
- D 1,1
Answer & Solution
Correct Answer
(B) 0,1
Step-by-step Solution
Detailed explanation
From logic circuit, Given \(A=1\) and \(B=1\) \(A^{\prime} \frac{B^{\prime}}{A \cdot A+B}\) Output \(Y_1\) \begin{array}{l|l|l}\mathrm{A}^{\prime} & \mathbf{B}^{\prime} & \mathrm{Y}_1 \\\hline A & \overline{\mathrm{~A}+\mathrm{B}} & \overline{A \cdot \bar{A}+\mathrm{B}}=0…
See the Complete Solution
Get step-by-step explanations for this and 2.5 Lakh+ more JEE, NEET & CET questions.
- Unlock all solutions
- Practice the full chapter
- Track accuracy across PYQs
4.8 rated on Google Play · 14,000+ reviews
More questions from Physics
- The half lives of two radioactive materials \(A\) and \(B\) are respectively \(T\) and \(2 T\). If the ratio of the initial masses of the materials \(A\) and \(B\) is \(8: 1\), then the time after which the ratio of the masses of the materials \(A\) and \(B\) becomes \(4: 1\) isTS EAMCET 2024 Easy
- A polyatomic gas has \(f\) vibrational degrees of freedom, then the ratio of the specific heat at constant pressure to that at constant volume will beTS EAMCET 2018 Easy
- A steel wire and a copper wire are joined end to end having equal cross-sections. The elongation of two wires is found to be equal under tension. What is the ratio of the length of the steel to the length of copper wire? (Young modulus of steel and, Young modulus of copper )TS EAMCET 2021 Easy
- A person wearing a parachute jumps off a plane from a height of 2 km from the ground and falls freely for 20 m before his parachute opens. After his parachute opens if he continues to move uniformly with the velocity attained due to his freefall, the total time taken by the person to reach the ground is
(Acceleration due to gravity \(=10 \mathrm{~ms}^{-2}\) )TS EAMCET 2025 Medium - The pass-axes of two polarisers were kept such that the incident unpolarised beam of intensity \(I_0\), gets completely blocked. Another polariser was introduced in between these two polarisers with its pass-axis \(60^{\circ}\) with respect to the pass-axis of the first one. The output intensity would then becomeTS EAMCET 2019 Medium
- The percentage of heat supplied to a diatomic ideal gas that is converted into work in an isobaric process isTS EAMCET 2023 Medium
More PYQs from TS EAMCET
- A block kept on a frictionless horizontal surface is connected to one end of a horizontal spring of constant \(100 \mathrm{Nm}^{-1}\) whose other end is fixed to a rigid vertical wall. Initially the block is at its equilibrium position. The block is pulled to a distance of 8 cm and released. The kinetic energy of the block when it is at a distance of 3 cm from the mean position isTS EAMCET 2024 Easy
- The mean kinetic energy of monoatomic gas molecules under standard conditions is \(\left\langle E_1\right\rangle\). If the gas is compressed adiabatically 8 times to its initial volume, the mean kinetic energy of gas molecules changes to \(\left\langle E_2\right\rangle\). The ratio \(\frac{\left\langle E_2\right\rangle}{\left\langle E_1\right\rangle}\) isTS EAMCET 2018 Medium
- At very high frequencies, the current (i) in the given circuit is
TS EAMCET 2023 Hard - A bullet is fired at time \(t=0\) with velocity \(20 \mathrm{~m} / \mathrm{s}\) and at an initial angle of \(30^{\circ}\) with the horizontal. The an angle between the displacement vector and the horizontal after time \(0.1 \mathrm{~s}\) is (Assume \(\mathrm{g}=10 \mathrm{~m} / \mathrm{s}^2\) )TS EAMCET 2022 Medium
- Two blocks of masses \(2 \mathrm{~kg}\) and \(1 \mathrm{~kg}\) are tied to the ends of a string which passes over a light frictionless pulley. The blocks are held at rest at the same horizontal level and then released suddenly. The distance traversed by their centre of mass in 2 seconds is (acceleration due to gravity \(=10 \mathrm{~ms}^{-2}\) )TS EAMCET 2023 Medium
- An ideal gas in a closed container is heated so that the final rms speed of the gas particles increases by 2 times the initial rms speed. If the initial gas temperature is \(27^{\circ} \mathrm{C}\), then the final temperature of the ideal gas is :TS EAMCET 2019 Easy