TS EAMCET · Physics · Communication System
The function of a detector is to demodulate the modulated carrier wave and the steps for this process are
- A demodulation and filtering
- B demodulation and rectification
- C rectification and filtering
- D regeneration and filtering
Answer & Solution
Correct Answer
(C) rectification and filtering
Step-by-step Solution
Detailed explanation
In demodulation process, the detector performs following functions. (a) Rectification To convert all the negative going peaks into positive going peaks, effectively doubling the frequency of the carrier in modulated wave. b) Filtering Separation of AC and DC.
See the Complete Solution
Get step-by-step explanations for this and 2.5 Lakh+ more JEE, NEET & CET questions.
- Unlock all solutions
- Practice the full chapter
- Track accuracy across PYQs
4.8 rated on Google Play · 14,000+ reviews
More questions from Physics
- For a projectile if \(\alpha\) is the angle of projection, \(R\) is the range, \(h\) is the maximum height, \(T\) is the time of flight thenTS EAMCET 2022 Medium
- If \(A\) is the areal velocity of a planet of mass \(M\), its angular momentum isTS EAMCET 2002 Easy
- Three logic gates are connected as shown in the figure. If the inputs are \(\mathrm{A}=1, \mathrm{~B}=0\) and \(\mathrm{C}=1\), then the values of \(y_1, y_2\) and \(y_3\) respectively are
TS EAMCET 2025 Medium - An ideal gas is subjected to cyclic process involving four thermodynamic states, the amounts of heat \((Q)\) and work \((W)\) involved in each of these states are \(\begin{aligned} & Q_1=6000 \mathrm{~J}, \quad Q_2=-5500 \mathrm{~J} ; Q_3=-3000 \mathrm{~J} ; \ & Q_4=3500 \mathrm{~J} \ & W_1=2500 \mathrm{~J} ; \quad W_2=-1000 \mathrm{~J} ; \quad W_3=-1200 \mathrm{~J} ; \ & W_4=x \mathrm{~J} . \end{aligned}\) The ratio of the net work done by the gas to the total heat absorbed by the gas is \(\eta\). The values of \(x\) and \(\eta\) respectively areTS EAMCET 2009 Medium
- The length of a potentiometer wire is 2.5 m and its resistance is \(8 \Omega\). A cell of negligible internal resistance and emf of 2.5 V is connected in series with a resistance of \(242 \Omega\) in the primary circuit. The potential difference between two points separated by a distance of 20 cm on the potentiometer wire isTS EAMCET 2025 Medium
- A steel wire and a copper wire are joined end to end having equal cross-sections. The elongation of two wires is found to be equal under tension. What is the ratio of the length of the steel to the length of copper wire? (Young modulus of steel and, Young modulus of copper )TS EAMCET 2021 Easy
More PYQs from TS EAMCET
- The magnetic field at a perpendicular distance of one metre from a wire carrying current of \(1 \mathrm{~A}\) isTS EAMCET 2023 Easy
- A crystal of intrinsic silicon at room temperature has a carrier concentration of \(1.6 \times 10^{16} / \mathrm{m}^3\). If the donor concentration level is \(4.8 \times 10^{20} / \mathrm{m}^3\), then the concentration of holes in the semiconductor isTS EAMCET 2014 Easy
- In the circuit given below, the capacitor is charged by closing the switch and opening the switch . After charging, the switch is opened and is closed, then the maximum current in the circuit
TS EAMCET 2018 Easy - If Planck's constant is \(6.63 \times 10^{-34} \mathrm{Js}\), then the slope of a graph drawn between cut off voltage and frequency of incident light in a photoelectric experiment isTS EAMCET 2024 Easy
- If the frequencies of the carrier wave and message signal are 1 MHz and 28 kHz respectively, then the frequencies of the side bands areTS EAMCET 2025 Easy
- Consider a vessel filled with a liquid upto height The bottom of the vessel lies in the plane passing through the origin. The density of the liquid varies with -axis as . If and are the pressures at the bottom surface and top surface of the liquid, the magnitude of is :TS EAMCET 2018 Hard