TS EAMCET · Physics · Work Power Energy
Conservative forces are defined as the force for which,
- A work done depends only on the initial and final positions.
- B work done depends on the initial and final positions and also on the path taken.
- C work done depends only on the path taken.
- D work done depends only on the initial position.
Answer & Solution
Correct Answer
(A) work done depends only on the initial and final positions.
Step-by-step Solution
Detailed explanation
Conservative force is a force with the property that the total work done in moving a particle between two points is independent of the path followed but depends only on the initial and final positions. So, the correct option is (1).
See the Complete Solution
Get step-by-step explanations for this and 2.5 Lakh+ more JEE, NEET & CET questions.
- Unlock all solutions
- Practice the full chapter
- Track accuracy across PYQs
4.8 rated on Google Play · 14,000+ reviews
More questions from Physics
- Water is pumped steadily out of a flooded basement, at the speed of through a hose (tube) of radius, passing through a window, above the water level. The power of the pump is (Assume , density of water )TS EAMCET 2021 Medium
- A rod of length \(l\) is held vertically stationary with its lower end located at a point \(P\), on the horizontal plane. When the rod is released to topple about \(P\), the velocity of the upper end of the rod with which it hits the ground isTS EAMCET 2009 Easy
- Assume each oil drop consists of a capacitance of \(C\). If combine \(n\) drops to form a bigger drop, then the capacitance of bigger \(\operatorname{drop} C^{\prime}\) would beTS EAMCET 2020 Medium
- How much thermal energy is required to change a \(40 \mathrm{~g}\) ice cube from solid at \(-10^{\circ} \mathrm{C}\) to steam at \(110^{\circ} \mathrm{C}\) ? [Assume, latent heat of fusion for water \(=80 \mathrm{kcal} / \mathrm{kg}\), specific heat of water \(=1 \mathrm{kcal} / \mathrm{kg}^{\circ} \mathrm{C}\), specific heat of ice \(=0.5 \mathrm{kcal} / \mathrm{kg}^{\circ} \mathrm{C}\), specific heat of steam \(=0.48 \mathrm{kcal} / \mathrm{kg}^{\circ} \mathrm{C}\), latent heat of vaporisation of water \(\left.=540 \mathrm{kcal} / \mathrm{kg}^{\circ} \mathrm{C}\right]\)TS EAMCET 2020 Easy
- Sum of magnitude of two forces is \(25 \mathrm{~N}\). The resultant of these forces is normal to the smaller force and has a magnitude of \(10 \mathrm{~N}\). Then the two forces areTS EAMCET 2015 Hard
- A particle of mass ' \(\mathrm{m}\) ' is moving along a line \(\mathrm{y}=\mathrm{x}+\mathrm{a}\) with a constant velocity ' \(v\) '. The angular momentum of the particle about the origin isTS EAMCET 2023 Easy
More PYQs from TS EAMCET
- A straight wire of mass \(0.2 \mathrm{~kg}\) and length \(1.5 \mathrm{~m}\) carries a current \(2 \mathrm{~A}\) is shown in the figure. It is suspended in mid-air by a uniform magnetic field \(B\) pointing to the plane of paper. The magnitude of magnetic field is (ignore, earth's magnetic field and assume \(g=10 \mathrm{~m} / \mathrm{s}^2\) )
TS EAMCET 2020 Medium - The frequency of an alternating voltage is 50 Hz. The time taken for instantaneous voltage to increase from zero to half of its peak voltage isTS EAMCET 2025 Medium
- A copper rod of length \(75 \mathrm{~cm}\) and an iron rod of length \(125 \mathrm{~cm}\) are joined together end to end. Both are of circular cross-section with diameter \(2 \mathrm{~cm}\). The free ends of the copper and iron are maintained at \(100^{\circ} \mathrm{C}\) and \(0^{\circ} \mathrm{C}\) respectively. The surfaces of the bars are insulated thermally. The temperature of the copper-iron junction is [Thermal conductivity of copper is \(386.4 \mathrm{~W} / \mathrm{m}-\mathrm{K}\) and thermal conductivity of iron is \(48.46 \mathrm{~W} / \mathrm{m}-\mathrm{K}\) ]TS EAMCET 2015 Easy
- If \(C, R, L\) and \(I\) denote capacity, resistance, inductance and electric current respectively, the quantities having the same dimensions of time are :
(1) \(C R\)
(2) \(\frac{L}{R}\)
(3) \(\sqrt{L C}\)
(4) \(L I^2\)TS EAMCET 2006 Easy - Let \(\lambda_P\) and \(\lambda_L\) be the longest wavelengths observed in the Paschen and Lyman series respectively. Choose the correct optionTS EAMCET 2019 Medium
- A current of 4 A is passed through a square loop of side 5 cm made of a uniform manganin wire as shown in the figure. The magnetic field at the centre of the loop is
TS EAMCET 2025 Medium