In a screw gauge, the zero of the circular scale lies 3 divisions above the horizontal pitch line when their metallic studs are brought in contact. Using this instrument thickness of a sheet is measured. If pitch scale reading is 1 mm and the circular scale reading is 51 then the correct thickness of the sheet is ___________ mm.
[Assume least count is 0.01 mm ]

The energy required to take a satellite to a height \(‘h’\) above Earth surface (radius of Earth \(= 6.4 \times 10^3\,km\) ) is \(E_1\) and kinetic energy required for the satellite to be in a circular orbit at this height is \(E_2.\) The value of \(h\) for which \(E_1\) and \(E_2\) are equal is

Two charges, each equal to \(q\), are kept at \(x = -a\) and \(x = a\) on the \(x-\)axis. A particle of mass \(m\) and charge \(q_0=\frac{q}{2}\) is placed at the origin. If charge \(q_0\) is given a small displacement \((y < < a)\) along the \(y-\)axis, the net force acting on the particle is proportional to

A test particle is moving in a circular orbit in the gravitational field produced by a mass density \(\rho \left( r \right) = \frac{K}{{{r^2}}}\). Identify the correct relation between the radius \(R\) of the particle’s orbit and its period \(T\)

A uniform solid cylinder of length \(L\) and radius \(R\) has moment of inertia about its axis equal to \(I_1\). A small co-centric cylinder of length \(L / 2\) and radius \(R / 3\) carved from this cylinder has moment of inertia about its axis equals to \(I_2\). The ratio \(I_1 / I_2\) is _________ .

If two vectors \(\vec{A}\) and \(\vec{B}\) having equal magnitude \(\mathrm{R}\) are inclined at an angle \(\theta\), then...

In an experiment, the resistance of a material is plotted as a function of temperature (in some range). As shown in the figure, it is a straight line. One may conclude that:

In the circuit diagram shown in figure given below, the current flowing through resistance \(3\, \Omega\) is \(\frac{ x }{3}\,A\). The value of \(x\) is \(...........\)

Due to cold weather a \(1\, {m}\) water pipe of cross-sectional area \(1\, {cm}^{2}\) is filled with ice at \(-10^{\circ} {C}\). Resistive heating is used to melt the ice. Current of \(0.5\, {A}\) is passed through \(4\, {k} \Omega\) resistance. Assuming that all the heat produced is used for melting, what is the minimum time required ? (In \({s}\)) (Given latent heat of fusion for water/ice \(=3.33 \times 10^{5}\, {J} {kg}^{-1}\), specific heat of ice \(=2 \times 10^{3}\, {J}\) \({kg}^{-1}\) and density of ice \(=10^{3}\, {kg} / {m}^{3}\)

The coefficient of static friction between a wooden block of mass \(0.5\, kg\) and a vertical rough wall is \(0.2\) The magnitude of horizontal force that should be applied on the block to keep it adhere to the wall will be \(N\) \(\left[ g =10\, ms ^{-2}\right]\)