A transformer operating at primary voltage \(8\,kV\) and secondary voltage \(160\,V\) serves a load of \(80\,kW\). Assuming the transformer to be ideal with purely resistive load and working on unity power factor, the loads in the primary and secondary circuit would be.

Pick an option to check your answer.

Verified Solution

Answer & Solution

Correct Answer

(C) \(800\,\Omega\) and \(0.32\,\Omega\)

Step-by-step Solution

Detailed explanation

\(\frac{\left(8 \times 10^{3}\right)^{2}}{R_{p}}=80 \times 10^{3}\)

\(R _{ p }=800\,\Omega\)

\(\frac{(160)^{2}}{R_{S}}=80 \times 10^{3}\)

\(R _{ S }=0.32\,\Omega\)

Same subject

The equation of a circle is given by \(x^2+y^2=a^2\), where \(a\) is the radius. If the equation is modified to change the origin other than \((0,0)\), then find out the correct dimensions of \(A\) and \(B\) in a new equation: \((x-A t)^2+\left(y-\frac{t}{B}\right)^2=a^2\).The dimensions of \(t\) is given as \(\left[ T ^{-1}\right]\).

JEE Mains 2023 Medium
A convergent doublet of separated lenses, corrected for spherical aberration, has resultant focal length of \(10\,cm\). The separation between the two lenses is \(2\,cm\). The focal lengths of the component lenses

JEE Mains 2018 Hard
A solid sphere and a hollow sphere of the same mass and of same radius are rolled on an inclined plane. Let the time taken to reach the bottom by the solid sphere and the hollow sphere be \(t_1\) and \(t_2\), respectively, then...

JEE Mains 2025 Easy
In an octagon \(ABCDEFGH\) of equal side, what is the sum of \(\overrightarrow{ AB }+\overrightarrow{ AC }+\overrightarrow{ AD }+\overrightarrow{ AE }+\overrightarrow{ AF }+\overrightarrow{ AG }+\overrightarrow{ AH }\) if, \(\overrightarrow{ AO }=2 \hat{ i }+3 \hat{ j }-4 \hat{ k }\)

JEE Mains 2021 Hard
A particle is executing simple harmonic motion. Its amplitude is \(A\) and time period is \(5\) sec. The time required by it to move from \(x = A\) to \(x = \dfrac{A}{\sqrt{2}}\) is _______ sec.

JEE Mains 2026 Medium
A system of two blocks of masses \(m =2 \; kg\) and \(M=8 \; kg\) is placed on a smooth table as shown in figure. The coefficient of static friction between two blocks is \(0.5\). The maximum horizontal force \(F\) that can be applied to the block of mass \(M\) so that the blocks move together will be \(\dots \; N\)

JEE Mains 2022 Medium

Explore more questions on app

From JEE Mains

A parallel plate capacitor with area \(200\,cm^2\) and separation between the plates \(1.5\,cm\), is connected across a battery of \(emf\) \(V\). If the force of attraction between the plates is \(25\times10^{-6}\,N\), the value of \(V\) is approximately........\(V\) \(\left( {{\varepsilon _0} = 8.85 \times {{10}^{ - 12}}\,\frac{{{C^2}}}{{N{m^2}}}} \right)\)

JEE Mains 2018 Hard
In a Young's double slit experiment, the slits are separated by \(0.3\, {mm}\) and the screen is \(1.5\, {m}\) away from the plane of slits. Distance between fourth bright fringes on both sides of central bright is \(2.4\, {cm}\). The frequency of light used is \(..........\,\times 10^{14} {Hz}\)

JEE Mains 2021 Hard
Consider a force \(\overrightarrow{\mathrm{F}}=-\mathrm{x} \hat{\mathrm{i}}+\mathrm{y} \hat{\mathrm{j}}\). The work done by this force in moving a particle from point \(\mathrm{A}(1,0)\) to \(\mathrm{B}(0,1)\) along the line segment is (all quantities are in \(SI\) units)

JEE Mains 2020 Medium
Suppose there is a uniform circular disc of mass M kg and radius r m shown in figure. The shaded regions are cut out from the disc. The moment of inertia of the remainder about the axis A of the disc is given by \(\frac{ x }{256} Mr ^2\). The value of x is ___________.

JEE Mains 2026 Easy

Explore more questions on app