The correct option(s) to distinguish nitrate salts of $M{n}^{2+} \mathrm{a}\mathrm{n}\mathrm{d} C{u}^{2+}$ taken separately is(are)

The density (in \(\mathrm{g} \mathrm{cm}^{-3}\) ) of the metal which forms a cubic close packed (ccp) lattice with an axial distance (edge length) equal to 400 pm is \(\qquad\) .
Use: Atomic mass of metal \(=105.6 \mathrm{amu}\) and Avogadro's constant \(=6 \times 10^{23} \mathrm{~mol}^{-1}\)

The compound (s) having peroxide linkage is(are) :

The spin only magnetic moment value (in Bohr magneton units) of \(\mathrm{Cr}(\mathrm{CO})_6\) is

The total number of ${\mathrm{sp}}^2$ hybridised carbon atoms in the major product $\mathbf{P}$ (a non-heterocyclic compound) of the following reaction is

To form a complete monolayer of acetic acid on \(1 \mathrm{~g}\) of charcoal, \(100 \mathrm{~mL}\) of \(0.5 \mathrm{M}\) acetic acid was used. Some of the acetic acid remained unadsorbed. To neutralize the unadsorbed acetic acid, 40 \(\mathrm{mL}\) of \(1 \mathrm{M} \mathrm{NaOH}\) solution was required. If each molecule of acetic acid occupies \(\mathbf{P} \times 10^{-23} \mathrm{~m}^2\) surface area on charcoal, the value of \(\mathbf{P}\) is _______ [Use given data: Surface area of charcoal \(=1.5 \times 10^2 \mathrm{~m}^2 \mathrm{~g}^{-1} ;\) Avogadro's number \(\left(\mathrm{N}_{\mathrm{A}}\right)=6.0 \times 10^{23}\) \(\left.\mathrm{mol}^{-1}\right]\)

Statement 1 Bromobenzene, upon reaction with \(\mathrm{Br}_2 / \mathrm{Fe}\) gives 1, 4-dibromobenzene as the major product.
Statement 2 In bromobenzene, the inductive effect of the bromo group is more dominant than the mesomeric effect in directing the incoming electrophile.

For any real number $x$, let $\left[x\right]$ denotes the largest integer less than or equal to $x$. If $I={\int }_0^{10}\left[\sqrt{\frac{10x}{x+1}}\right]dx$, then the value of $9I$ is ____.

In a one-litre flask, $6$ moles of $\mathrm{A}$ undergoes the reaction $\mathrm{A}( \mathrm{g})\rightleftharpoons \mathrm{P}( \mathrm{g})$. The progress of product formation at two temperatures (in Kelvin), ${\mathrm{T}}_1$ and ${\mathrm{T}}_2$, is shown in the figure: If ${\mathrm{T}}_1=2{\mathrm{T}}_2$ and$\left({\mathrm{\Delta G}}_2^{\mathrm{o}}-{\mathrm{\Delta G}}_1^{\mathrm{o}}\right)={\mathrm{RT}}_2\mathrm{lnx}$ , then the value of $\mathrm{x}$ is
[ ${\mathrm{\Delta G}}_1^{\mathrm{o}}$ and ${\mathrm{\Delta G}}_2^{\mathrm{o}}$ are standard Gibb's free energy change for the reaction at temperatures ${\mathrm{T}}_1$ and ${\mathrm{T}}_2$, respectively.]

A circular disc with a groove along its diameter is placed horizontally. A block of mass \(1 \mathrm{~kg}\) is placed as shown. The coefficient of friction between the block and all surfaces of groove in contact is \(\mu=2 / 5\). The disc has an acceleration of \(25 \mathrm{~m} / \mathrm{s}^2\). Find the acceleration of the block with respect to disc.

Two coherent monochromatic point sources $S_1$ and $S_2$ of wavelength $\lambda =600nm$ are placed symmetrically on either side of the center of the circle as shown. The sources are separated by a distance $d=1.8mm.$ This arrangement produces interference fringes visible as alternate bright and dark spots on the circumference of the circle. The angular separation between two consecutive bright spots is $\mathrm{\Delta }\theta$ . Which of the following options is/are correct?

Let $T_1$ and $T_2$ be two distinct common tangents to the ellipse $E:\frac{x^2}{6}+\frac{y^2}{3}=1$ and the parabola $P:y^2=12x$. Suppose that the tangent $T_1$ touches $P$ and $E$ at the points $A_1$ and $A_2$, respectively and the tangent $T_2$ touches $P$ and $E$ at the points $A_4$ and $A_3$, respectively. Then which of the following statements is(are) true?

Paragraph :

A thermal power plant produces electric power of \(600 \mathrm{~kW}\) at \(4000 \mathrm{~V}\), which is to be transported to a place \(20 \mathrm{~km}\) away from the power plant for consumers' usage. It can be transported either directly with a cable of large current carrying capacity or by using a combination of step-up and step-down transformers at the two ends. The drawback of the direct transmission is the large energy dissipation. In the method using transformers, the dissipation is much smaller. In this method, a step-up transformer is used at the plant side so that the current is reduced to a smaller value. At the consumers' end, a step-down transformer is used to supply power to the consumers at the specified lower voltage. It is reasonable to assume that the power cable is purely resistive and the transformers are ideal with a power factor unity. All the currents and voltages mentioned are rms values.

Question :

In the method using the transformers, assume that the ratio of the number of turns in the primary to that in the secondary in the step-up transformer is \(1: 10\). If the power to the consumers has to be supplied at \(200 \mathrm{~V}\), the ratio of the number of turns in the primary to that in the secondary in the step-down transformer is