TS EAMCET · Physics · Semiconductors
In the logic circuit given below; if \(X=1\) and \(Y=1\) then the values of \(\mathrm{P}, \mathrm{Q}\) and \(\mathrm{R}\) are
- A \(\mathrm{P}=1, \mathrm{Q}=1, \mathrm{R}=0\)
- B \(\mathrm{P}=0, \mathrm{Q}=1, \mathrm{R}=0\)
- C \(P=1, Q=0, R=1\)
- D \(P=1, Q=1, R=1\)
Answer & Solution
Correct Answer
(A) \(\mathrm{P}=1, \mathrm{Q}=1, \mathrm{R}=0\)
Step-by-step Solution
Detailed explanation
See the Complete Solution
Get step-by-step explanations for this and 2.5 Lakh+ more JEE, NEET & CET questions.
- Unlock all solutions
- Practice the full chapter
- Track accuracy across PYQs
4.8 rated on Google Play · 14,000+ reviews
More questions from Physics
- The relation between the current \(i\) (in ampere) in a conductor and the time \(t\) (in second) is \(i=12 t+9 t^2\). The charge passing through the conductor between the times \(t=2 \mathrm{~s}\) and \(t=10 \mathrm{~s}\) isTS EAMCET 2024 Easy
- Velocities (V) and accelerations (a) in two systems of units 1 and 2 are related as \(V_2=\frac{n}{m^2} V_1\) and \(a_2=\frac{a_1}{m n}\) respectively. Here \(\mathrm{m}\) and \(\mathrm{n}\) are constants. Dimensionally relations between distances \(\left(\mathrm{S}_1\right.\) and \(\left.\mathrm{S}_2\right)\) and times \(\left(\mathrm{t}_1\right.\) and \(t_2\) ) in the two systems are respectively.TS EAMCET 2023 Easy
- If and represent the energies, and represent the times, in which of the following is dimensionally correct relation?TS EAMCET 2020 Hard
- Which of the following components of an \(L-C-R\) circuit, with an AC supply, dissipates energy?TS EAMCET 2020 Medium
- A long solenoid has and carries current . An electron moves within the solenoid in a circle of radius perpendicular to the solenoid axis. If the speed of the electron is then the current in the solenoid is
(Take unit, mass of electron , charge of electron )TS EAMCET 2022 Hard - A message signal of frequency is used to modulate a carrier of frequency . If the side bands produced are and , then isTS EAMCET 2022 Easy
More PYQs from TS EAMCET
- A force separately produces accelerations of \(18 \mathrm{~ms}^{-2}, 9 \mathrm{~ms}^{-2}\) and \(6 \mathrm{~ms}^{-2}\) in three bodies of masses \(\mathrm{P}, \mathrm{Q}\) and R respectively. If the same force is applied on a body of mass \(\mathrm{P}+\mathrm{Q}+\mathrm{R}\), then the acceleration of that body isTS EAMCET 2025 Medium
- A heating element of mass \(100 \mathrm{~g}\) and having specific heat of \(1 \mathrm{~J} /\left(\mathrm{g}^{\circ} \mathrm{C}\right)\) is exposed to surrounding air at \(27^{\circ} \mathrm{C}\). The element attains a steady state temperature of \(127^{\circ} \mathrm{C}\), while absorbing 100W of electric power. If the power is switched Off, then approximate time taken by the element to cool down to \(126^{\circ} \mathrm{C}\) will be (neglect radiation)TS EAMCET 2020 Medium
- A fly-wheel of mass \(25 \mathrm{~kg}\) has a radius of \(0.2 \mathrm{~m}\). It is making \(240 \mathrm{rpm}\). What is the torque necessary to bring to rest in \(20 \mathrm{~s}\) ?TS EAMCET 2010 Medium
- An ideal monoatomic gas of volume is adiabatically expanded to a volume at The final temperature in Kelvins is
(use )TS EAMCET 2021 Medium - Two non-reactive monoatomic ideal gases have their atomic masses in the ratio The ratio of their partial pressures when enclosed in a vessel kept at a constant temperature is The ratio of their densities isTS EAMCET 2021 Easy
- One end of a uniform glass capillary tube of radius \(r=0.025 \mathrm{~cm}\) is immersed vertically in water to a depth \(h=1 \mathrm{~cm}\). The excess pressure in \(\mathrm{N} / \mathrm{m}^2\) required to blow an air bubble out of the tube (Surface tension of water \(=7 \times 10^{-2} \mathrm{~N} / \mathrm{m}\) Density of water \(=10^3 \mathrm{~kg} / \mathrm{m}^3\). Acceleration due to gravity \(=10 \mathrm{~m} / \mathrm{s}^2\) )TS EAMCET 2004 Medium