TS EAMCET · Physics · Mechanical Properties of Fluids
A horizontal pipe of non-uniform cross-section allows water to flow through it with a velocity \(1 \mathrm{~ms}^{-1}\) when pressure is \(50 \mathrm{kPa}\) at a point. If the velocity of flow has to be \(2 \mathrm{~ms}^{-1}\) at some other point, the pressure at that point should be
- A \(50 \mathrm{kPa}\)
- B \(100 \mathrm{kPa}\)
- C \(48.5 \mathrm{kPa}\)
- D \(24.25 \mathrm{kPa}\)
Answer & Solution
Correct Answer
(C) \(48.5 \mathrm{kPa}\)
Step-by-step Solution
Detailed explanation
According to Bernoulli's equation for horizontal pipe,…
See the Complete Solution
Get step-by-step explanations for this and 2.5 Lakh+ more JEE, NEET & CET questions.
- Unlock all solutions
- Practice the full chapter
- Track accuracy across PYQs
4.8 rated on Google Play · 14,000+ reviews
More questions from Physics
- A tank of height \(15 \mathrm{~m}\) and cross-section area \(10 \mathrm{~m}^2\) is filled with water. There is a small hole of cross-section area \(a\) which is much smaller than the container, located at a height of \(12 \mathrm{~m}\) from the base of the container. How much force should be applied with a piston at the top level, so that the water coming out of the hole hits the ground at a distance of \(16 \mathrm{~m}\) ? (Take, density of water \(=1000 \mathrm{~kg} \mathrm{~m}^{-3}\) )
TS EAMCET 2018 Medium - 20 kV electrons can produce X-rays with a minimum wavelength ofTS EAMCET 2025 Medium
- The vertical displacement ( \(y\) in metre) of a projectile in terms of its horizontal displacement ( \(x\) in metre) is given by \(y=\left(\sqrt{3} x-0.2 x^2\right)\). The time of flight of the projectile is
(Acceleration due to gravity \(=10 \mathrm{~ms}^{-2}\) )TS EAMCET 2025 Medium - A planet is moving in a circular orbit. It completes revolutions in . What is its angular frequency?TS EAMCET 2020 Hard
- In Young's double slit experiment with light of wavelength \(\lambda\), the intensity of light at a point on the screen where the path difference becomes \(\frac{\lambda}{3}\) is
(I is intensity of the central bright fringe)TS EAMCET 2025 Medium - In the following nuclear reaction \(\mathrm{x}\) is \({ }_{13} \mathrm{Al}^{27}+{ }_2 \mathrm{He}^4 \rightarrow\) \({ }_0^{n^1+\mathrm{X}}\)TS EAMCET 2023 Medium
More PYQs from TS EAMCET
- A block of mass \(10 \mathrm{~kg}\), initially at rest, makes a downward motion on \(45^{\circ}\) inclined plane. Then the distance travelled by the block after \(2 \mathrm{~s}\) is (Assume the coefficient of kinetic friction to be 0.3 and \(g=10 \mathrm{~ms}^{-2}\) )TS EAMCET 2019 Hard
- The Brewster angle for air to glass transition of light is (Refractive index of glass \(=1.5\) ).TS EAMCET 2024 Medium
- A circular copper ring at \(30^{\circ} \mathrm{C}\) has a hole with an area of \(9.98 \mathrm{~cm}^2\). It is made to slip onto a steel rod of crosssectional area of \(10 \mathrm{~cm}^2\), by raising the temperature of both ring and rod simultaneously by an amount \(\Delta \mathrm{T}\). If the coefficient of linear expansion of copper and steel are \(17 \times 10^{-6} /{ }^{\circ} \mathrm{C}\) and \(11 \times 10^{-6} /{ }^{\circ} \mathrm{C}\), then minimum value of \(\Delta \mathrm{T}\) should beTS EAMCET 2022 Hard
- The error in the measurement of the length and the breadth of a rectangular table is \(1 \%\). If the length and breadth of the table are \(1 \mathrm{~m}\) and \(50 \mathrm{~cm}\) respectively, then the area of the table including error isTS EAMCET 2021 Easy
- A moving coil galvanometer has a rectangular wire coil of enclosed area \(0.001 \mathrm{~m}^2\) and 500 turns. The coil operates in a radial magnetic field of \(0.2 \mathrm{~T}\) and carries a current of \(6 \pi \times 10^{-8} \mathrm{~A}\). If the torsional spring constant is \(6 \times 10^{-7} \mathrm{~N}-\mathrm{m} / \mathrm{rad}\), then the angular deflection of the coil in radians isTS EAMCET 2018 Easy
- Assertion: The zero velocity of a particle at any instant always implies zero acceleration at that instant Reason: A body is momentarily at rest when reverses its direction of motion. The correct option among the following isTS EAMCET 2022 Medium