TS EAMCET · Physics · Mechanical Properties of Fluids
A big liquid drop splits into ' \(n\) ' similar small drops under isothermal conditions, then in this process
- A volume decreases
- B total surface area decreases
- C energy is absorbed
- D energy is liberated
Answer & Solution
Correct Answer
(C) energy is absorbed
Step-by-step Solution
Detailed explanation
As, surface energy \(\propto\) Surface area \(\therefore\) During spliting of a big liquid drop, \(\Rightarrow\) Surface area increases Energy absorbed.
See the Complete Solution
Get step-by-step explanations for this and 2.5 Lakh+ more JEE, NEET & CET questions.
- Unlock all solutions
- Practice the full chapter
- Track accuracy across PYQs
4.8 rated on Google Play · 14,000+ reviews
More questions from Physics
- Consider the two following statements \(A\) and \(B\), and identify the correct choice given in the answers : \((A)\) Duddell's thermo galvanometer is suitable to measure direct current only. (B) Thermopile can measure temperature differences of the order of \(10^{-3}{ }^{\circ} \mathrm{C}\).TS EAMCET 2003 Medium
- An air bubble of radius \(1 \mathrm{~cm}\) rises from the bottom portion through a liquid of density \(1.5 \mathrm{~g} / \mathrm{cc}\) at a constant speed of \(0.25 \mathrm{~cm} \mathrm{~s}^{-1}\). If the density of air is neglected, the coefficient of viscosity of the liquid is approximately, (In Pas) :TS EAMCET 2006 Medium
- The area of cross-section of a potentiometer wire is \(6 \times 10^{-7} \mathrm{~m}^2\). The potential difference per unit length of the potentiometer wire when it is connected to a cell of negligible internal resistance and a resistor in series is \(0.15 \mathrm{Vm}^{-1}\). If the current through potentiometer wire is 0.3 A, then the resistivity of the material of the potentiometer wire isTS EAMCET 2025 Medium
- Two objects made of the same material have masses ' \(\mathrm{m}\) ' and ' \(2 \mathrm{~m}\) ' and are at temperatures ' \(2 \mathrm{~T}\) ' and ' \(\mathrm{T}\) ' respectively. When heat ' \(Q\) ' is supplied to the object of mass ' \(2 \mathrm{~m}\) ', its temperature raises to ' \(2 \mathrm{~T}\) '. If the same beat is supplied to the object of mass ' \(m\) ', its temperature raises toTS EAMCET 2023 Medium
- Light consisting of a plane waves of wavelength, \(\lambda_1=8 \times 10^{-5} \mathrm{~cm}\) and \(\lambda_2=6 \times 10^{-5} \mathrm{~cm}\) generates an interference pattern in Young's double slit experiment. If \(n_1\) denotes the \(n_1\) th dark fringe due to light of wavelength \(\lambda_1\) which coincides with \(n_2\) th bright fringe due to light of wavelength \(\lambda_2\), thenTS EAMCET 2019 Medium
- In a pair of adjacent coils if the current in one coil changes from \(10 \mathrm{~A}\) to \(2 \mathrm{~A}\) in a time \(0.2 \mathrm{~s}\), an emf of \(120 \mathrm{~V}\) is induced in another coil. The mutual inductance of the pair of the coils isTS EAMCET 2023 Medium
More PYQs from TS EAMCET
- Two cars and initially at rest are moving in the same direction with accelerations, and respectively. After a certain time, they achieve velocities and respectively and are separated by a distance of If then the quantity will beTS EAMCET 2021 Hard
- The error in the measurement of force acting normally on a square plate is \(3 \%\). If the error in the measurement of the side of the plate is \(1 \%\), then the error in the determination of the pressure acting on the plate isTS EAMCET 2025 Medium
- Identify the logic operation performed by the following circuit.
TS EAMCET 2022 Medium - A ball projected up passes the same height \(\mathrm{H}\) at \(2 \mathrm{~s}\) and \(10 \mathrm{~s}\). The value of \(\mathrm{H}\) is [Use \(\mathrm{g}=9.8 \mathrm{~m} / \mathrm{s}^2\) ]TS EAMCET 2022 Easy
- Two lenses \(A\) and \(B\) having focal lengths \(2.0 \mathrm{~cm}\) and \(5.0 \mathrm{~cm}\), respectively are placed \(14 \mathrm{~cm}\) apart. Lens \(A\) is placed to the left of lens \(B\). An object is placed \(3 \mathrm{~cm}\) to the left of lens \(A\). The distance of the image from lens \(A\) will beTS EAMCET 2019 Medium
- A primary coil and secondary coil are placed close to each other. A current, which changes at the rate of \(25 \mathrm{~A}\) in a millisecond, is present in the primary coil. If the mutual inductance is \(92 \times 10^{-6} \mathrm{H}\), then the value of induced emf in the secondary coil isTS EAMCET 2012 Easy