For nonnegative integers $s$ and $r$, let $\left(\begin{array}{l}s\\ r\end{array}\right)=\left\{\begin{array}{ll}\frac{s!}{r!\left(s-r\right)!}& \text{ if }r\le s\\ 0& \text{ if }r>s\end{array}\right.$. For positive integers $m$ and $n,$ let $g\left(m,n\right)=\sum _{p=0}^{m+n}\frac{f\left(m,n,p\right)}{\left(\begin{array}{c}n+p\\ p\end{array}\right)}$, where for any nonnegative integer $p$,
$f\left(m,n,p\right)=\sum _{i=0}^p\left(\begin{array}{c}m\\ i\end{array}\right)\left(\begin{array}{c}n+i\\ p\end{array}\right)\left(\begin{array}{c}p+n\\ p-i\end{array}\right)$. Then which of the following statements is/are TRUE?

Consider the lines \(L_{1}\) and \(L_{2}\) defined by
\[
L_{1}: x \sqrt{2}+y-1=0 \text { and } L_{2}: x \sqrt{2}-y+1=0
\]
For a fixed constant \(\lambda\), let \(C\) be the locus of a point \(P\) such that the product of the distance of \(P\) from \(L_{1}\) and the distance of \(P\) from \(L_{2}\) is \(\lambda^{2}\). The line \(y=2 x+1\) meets \(C\) at two points \(R\) and \(S\), where the distance between \(R\) and \(S\) is \(\sqrt{270}\).
Let the perpendicular bisector of \(R S\) meet \(C\) at two distinct points \(R^{\prime}\) and \(S^{\prime}\). Let \(D\) be the square of the distance between \(R^{\prime}\) and \(S^{\prime}\).
The value of ${\lambda }^2$ is

The value of $\sum _{k=1}^{13}\frac{1}{\sin \left(\frac{\pi }{4}+\frac{\left(k-1\right)\pi }{6}\right)\sin \left(\frac{\pi }{4}+\frac{k\pi }{6}\right)}$ is equal to

Let $n_1<n_2<n_3<n_4<n_5$ be positive integers such that $n_1+n_2+n_3+n_4+n_5=20$ . Then the number of such distinct arrangements $\left(n_1, n_2, n_3, n_4, n_5\right)$ is _________

Paragraph:
Let \(a\), b and \(c\) be three real numbers satisfying \(\left[\begin{array}{lll}a & b & c\end{array}\right]\left[\begin{array}{lll}1 & 9 & 7 \\ 8 & 2 & 7 \\ 7 & 3 & 7\end{array}\right]=\left[\begin{array}{lll}0 & 0 & 0\end{array}\right]\)Question:
Let \(b=6\), with \(a\) and \(c\) satisfying Eq. (E). If \(\alpha\) and \(\beta\) are the roots of the quadratic equation \(a x^2+b x+c=0\), then \(\sum_{n=0}^{\infty}\left(\frac{1}{\alpha}+\frac{1}{\beta}\right)^n\) is

Let $\overrightarrow{x}, \overrightarrow{y}$ and $\overrightarrow{z}$ be three vectors each of magnitude $\sqrt{2}$ and the angle between each pair of them is $\frac{\pi }{3}.$ If $\overrightarrow{a}$ is a non - zero vector perpendicular to $\overrightarrow{x}$ and $\overrightarrow{y} \times \overrightarrow{z}$ and $\overrightarrow{b}$ is a non - zero vector perpendicular to $\overrightarrow{y}$ and $\overrightarrow{z} \times \overrightarrow{x}$ , then

Let $H:\frac{x^2}{a^2 }-\frac{y^2}{b^2}=1$ , where $a>b>0$, be a hyperbola in the xy-plane whose conjugate axis $LM$ subtends an angle of ${60}^o$ at one of its vertices $N$. Let the area of the triangle $LMN$ be $4\sqrt{3}$.

LIST-I	LIST-II
A. The length of the conjugate axis of $H$ is	P. $8$
B. The eccentricity of $H$ is	Q. $\frac{4}{\sqrt{3}}$
C. The distance between the foci of $H$ is	R. $\frac{2}{\sqrt{3}}$
D. The length of the latus rectum of $H$ is	S. $4$

The correct option is:

A circular disc with a groove along its diameter is placed horizontally. A block of mass \(1 \mathrm{~kg}\) is placed as shown. The coefficient of friction between the block and all surfaces of groove in contact is \(\mu=2 / 5\). The disc has an acceleration of \(25 \mathrm{~m} / \mathrm{s}^2\). Find the acceleration of the block with respect to disc.

The reversible expansion of an ideal gas under adiabatic and isothermal conditions is shown in the figure. Which of the following statement(s) is (are) correct?

For each positive integer $n$, let $y_n={\frac{1}{n}\left((n+1)(n+2)\mathrm{...}(n+n)\right)}^{\frac{1}{n}}$. If $\underset{n\to \infty }{\lim }{y}_n=L,$ then the value of $\left[L\right]$ (where $\left[x\right]$ is the greatest integer less than or equal to $x$) is ____

Paragraph :
A thermally insulating cylinder has a thermally insulating and frictionless movable partition in the middle, as shown in the figure below. On each side of the partition, there is one mole of an ideal gas, with specific heat at constant volume, \(C_{V}=2 R\). Here, \(R\) is the gas constant. Initially, each side has a volume \(V_{0}\) and temperature \(T_{0}\). The left side has an electric heater, which is turned on at very low power to transfer heat \(Q\) to the gas on the left side. As a result the partition moves slowly towards the right reducing the right side volume to \(V_{0} / 2\). Consequently, the gas temperatures on the left and the right sides become \(T_{L}\) and \(T_{R}\), respectively. Ignore the changes in the temperatures of the cylinder, heater and the partition.

Question :
The value of $\frac{T_R}{T_0}$ is:

A compound ${\mathrm{H}}_2\mathrm{X}$ with molar weight of 80g is dissolved in a solvent having density of $0.4\mathrm{ }\mathrm{g}\mathrm{m}{\mathrm{l}}^{–1}$ . Assuming no change in volume upon dissolution, the molality of a 3.2 molar solution is

Paragraph :

A thermal power plant produces electric power of \(600 \mathrm{~kW}\) at \(4000 \mathrm{~V}\), which is to be transported to a place \(20 \mathrm{~km}\) away from the power plant for consumers' usage. It can be transported either directly with a cable of large current carrying capacity or by using a combination of step-up and step-down transformers at the two ends. The drawback of the direct transmission is the large energy dissipation. In the method using transformers, the dissipation is much smaller. In this method, a step-up transformer is used at the plant side so that the current is reduced to a smaller value. At the consumers' end, a step-down transformer is used to supply power to the consumers at the specified lower voltage. It is reasonable to assume that the power cable is purely resistive and the transformers are ideal with a power factor unity. All the currents and voltages mentioned are rms values.

Question :

In the method using the transformers, assume that the ratio of the number of turns in the primary to that in the secondary in the step-up transformer is \(1: 10\). If the power to the consumers has to be supplied at \(200 \mathrm{~V}\), the ratio of the number of turns in the primary to that in the secondary in the step-down transformer is