TS EAMCET · Physics · Semiconductors
The resistivity of a material is found to be . Then the material would be
- A Only insulator
- B Only metal
- C Only semiconductor
- D Only Superconductor
Answer & Solution
Correct Answer
(A) Only insulator
Step-by-step Solution
Detailed explanation
Decreasing order of resistivity is as follows. Insulators>semiconductors>conductors. Resistivity of the given material is very high. Therefore, the material would be insulator.
See the Complete Solution
Get step-by-step explanations for this and 2.5 Lakh+ more JEE, NEET & CET questions.
- Unlock all solutions
- Practice the full chapter
- Track accuracy across PYQs
4.8 rated on Google Play · 14,000+ reviews
More questions from Physics
- A particle of mass ' \(\mathrm{m}\) ' is moving along a line \(\mathrm{y}=\mathrm{x}+\mathrm{a}\) with a constant velocity ' \(v\) '. The angular momentum of the particle about the origin isTS EAMCET 2023 Easy
- Three logic gates are connected as shown in the figure. If the inputs are \(\mathrm{A}=1, \mathrm{~B}=0\) and \(\mathrm{C}=1\), then the values of \(y_1, y_2\) and \(y_3\) respectively are
TS EAMCET 2025 Medium - A capacitor is fully charged with a battery and then disconnected. A dielectric is then inserted into the capacitor. How do charges on surface of the dielectric and outer surface of the plates of the capacitor would change respectively?TS EAMCET 2020 Medium
- A block of mass \(4 m\) travelling at a velocity \(v_1\) in \(x\)-direction on a frictionless horizontal plane makes a head-on collision with another block of mass \(2 m\) travelling in opposite direction with a velocity \(v_2\). After collision, both the blocks travel as a single block along \(x\)-direction with a final velocity \(5 v_2\). The ratio of velocities \(\frac{v_1}{v_2}\) isTS EAMCET 2018 Easy
- The upper half of an inclined plane with an angle of inclination \(\phi\), is smooth while the lower half is rough. A body starting from rest at the top of the inclined plane comes to rest at the bottom of the inclined plane. Then the coefficient of friction for the lower half isTS EAMCET 2013 Hard
- Choose the correct statement from following.TS EAMCET 2022 Hard
More PYQs from TS EAMCET
- A non-conducting thin disc of radius rotates about its axis with an angular velocity . The surface charge density on the disc varies with the distance from the center as , where and are constants. If the magnetic induction at the center is , the value of isTS EAMCET 2018 Medium
- On a new temperature scale, the melting point of ice is 20 \({ }^{\circ} \mathrm{X}\) and the boiling point of water is \(110^{\circ} \mathrm{X}\). A temperature of \(40^{\circ} \mathrm{C}\) would be indicated on this new temperature scale asTS EAMCET 2023 Easy
- A cyclist traversed half the distance of a linear track with a velocity The remaining part of the track was covered with a velocity for half the time and a velocity for the other half of the time. If then the average velocity of the cyclist during the completion of the journey through the track isTS EAMCET 2021 Medium
- A wire, \(10 \mathrm{~m}\) long, has a resistance of \(40 \Omega\). It is connected in series with a resistance box of resistance \(R\) and a \(2 \mathrm{~V}\) storage cell. If the potential gradient along the wire is \(0.1 \mathrm{mV} / \mathrm{cm}\), then the value of \(R\) isTS EAMCET 2021 Easy
- A short bar magnet of magnetic moment \(2.5 \mathrm{Am}^2\) is kept in a uniform magnetic field of \(4 \times 10^{-5} \mathrm{~T}\). The work done in moving the magnet from its most stable position to most unstable position isTS EAMCET 2025 Medium
- Consider an increase of \(1 \%\) in each of radius of artery, viscosity of blood and density of blood respectively. The percentage change in flow rate of blood in artery isTS EAMCET 2022 Medium