TS EAMCET · Physics · Alternating Current
An inductance \(1 \mathrm{H}\) is connected in series with an AC source of \(220 \mathrm{~V}\) and \(50 \mathrm{~Hz}\). The. inductive reactance (in ohm) is
- A \(21 \pi\)
- B \(50 \pi\)
- C \(100 \pi\)
- D \(1000 \pi\)
Answer & Solution
Correct Answer
(C) \(100 \pi\)
Step-by-step Solution
Detailed explanation
Inductive reactance, \(X_L=\omega L\) \(\begin{aligned} & =2 \pi v L \\ & =2 \pi \times 50 \times 1=100 \pi \end{aligned}\)
See the Complete Solution
Get step-by-step explanations for this and 2.5 Lakh+ more JEE, NEET & CET questions.
- Unlock all solutions
- Practice the full chapter
- Track accuracy across PYQs
4.8 rated on Google Play · 14,000+ reviews
More questions from Physics
- Tanks \(A\) and \(B\) open at the top contain two different liquids upto certain height in them. A hole is made to the wall of each tank at a depth \(h\) from the surface of the liquid. The area of the hole in \(B\) is twice that of in \(A\). If the liquid mass flux through each hole is equal, then the ratio of the densities of the liquids respectively, isTS EAMCET 2002 Easy
- Charge passing through a conductor of cross-section area \(A=0.3 \mathrm{~m}^2\) is given by \(q=3 t^2+5 t+2\) in coulomb, where \(t\) is in second. What is the value of drift velocity at \(t=2 \mathrm{~s}\) ? (Given, \(n=2 \times 10^{25} / \mathrm{m}^3\) )TS EAMCET 2010 Easy
- A block of mass moving at a speed of compresses a spring through a distance before its speed is halved. Find the spring constant of the springTS EAMCET 2020 Medium
- A load of \(1 \mathrm{~kg}\) weight is a attached to one end of a steel wire of area of cross-section \(3 \mathrm{~mm}^2\) and Young's modulus \(10^{11} \mathrm{~N} / \mathrm{m}^2\). The other end is suspended vertically from a hook on a wall, then the load is pulled horizontally and released. When the load passes through its lowest position the fractional change in length is \(\left(g=10 \mathrm{~m} / \mathrm{s}^2\right)\)TS EAMCET 2008 Easy
- Which of the following components of an \(L-C-R\) circuit, with an AC supply, dissipates energy?TS EAMCET 2020 Medium
- The length of a metal wire is found to be \(L_1\) and \(L_2\) when the tension of \(T_1\) and \(T_2\) are applied to it respectively. The natural length of the wire isTS EAMCET 2020 Easy
More PYQs from TS EAMCET
- An AC generator \(10 \mathrm{~V}(\mathrm{rms})\) at \(200 \mathrm{rad} / \mathrm{s}\) is connected in series with a \(50 \Omega\) resistor, a \(400 \mathrm{mH}\) inductor and a \(200 \mu \mathrm{F}\) capacitor. The rms voltage across the inductor isTS EAMCET 2017 Easy
- A ball falls from a height \(h\) and rebounds after striking the floor. The coefficient of restitution is \(e\). The maximum distance covered before it comes to rest isTS EAMCET 2010 Hard
- A thin magnetic needle is placed in a magnetic field of 200 G with its axis at 30° to the direction of the field. Find the magnetic moment of the needle if it experiences a torque of 0.012 Nm in this field.TS EAMCET 2022 Easy
- The half-life of a radioactive element is \(10 \mathrm{~h}\). The fraction of initial radioactivity of the element that will remain after \(40 \mathrm{~h}\) isTS EAMCET 2012 Easy
- A piece of copper and another of germanium are cooled from room temperature to The resistance ofTS EAMCET 2020 Easy
- Assertion (A) Propagation of light through an optical fibre is due to total internal reflection taking place at the core-clad interface. Reason (R) Refractive index of the material of the core of the optical fibre is greater than that of air.TS EAMCET 2005 Easy