TS EAMCET · Physics · Alternating Current
An alternating emf given by the equation \(\mathrm{E}=200 \sin\) \((50 \pi \mathrm{t})\) (Where \(\mathrm{E}\) is in volts and \(\mathrm{t}\) is in seconds) is applied across a series combination of an inductor and a resistor having inductive reactance \(40 \Omega\) and resistance \(30 \Omega\) respectively. At time \(t=1 \mathrm{~s}\), the power dissipated by the resistor is close to \[ \left(\cos 53^{\circ}=0.6\right) \]
- A \(480 \mathrm{~W}\)
- B \(240 \mathrm{~W}\)
- C \(173 \mathrm{~W}\)
- D \(307 \mathrm{~W}\)
Answer & Solution
Correct Answer
(B) \(240 \mathrm{~W}\)
Step-by-step Solution
Detailed explanation
No solution. Refer to answer key.
See the Complete Solution
Get step-by-step explanations for this and 2.5 Lakh+ more JEE, NEET & CET questions.
- Unlock all solutions
- Practice the full chapter
- Track accuracy across PYQs
4.8 rated on Google Play · 14,000+ reviews
More questions from Physics
- A block of mass 2 kg is tied to one end of a 2 m long metal wire of \(1.0 \mathrm{~mm}^2\) area of cross-section and rotated in a vertical circle such that the tension in the wire is zero at the highest point. If the maximum elongation in the wire is 2 mm , the Young's modulus of the metal is (Acceleration due to gravity \(=10 \mathrm{~ms}^{-2}\) )TS EAMCET 2024 Medium
- Two strings \(\mathrm{A}\) and \(\mathrm{B}\) produce beat of frequency \(\Delta f_1>0\). The tension in string \(\mathrm{A}\) is slightly increased and the beat frequency is found to be \(\Delta f_2>0\). If the original frequency of \(\mathrm{A}\) is \(f_0\) and \(\Delta f_2 < \Delta f_1\), then the frequency of \(\mathrm{B}\) isTS EAMCET 2022 Easy
- A uniform conducting wire \(\mathrm{AB}\) of length \(5 \mathrm{~m}\) and resistance \(5 \Omega\) is connected as shown in the circuit. If the balancing point is obtained at \(3 \mathrm{~m}\) from \(\mathrm{A}\), then the value of \(\mathrm{E}\) is
TS EAMCET 2023 Easy - Assertion : Heat and work are modes of energy transfer to a system resulting in change in its internal energy. Reason : Heat and work in thermodynamics are state variables. The correct option among the following isTS EAMCET 2022 Medium
- A block of mass \(2 \mathrm{~kg}\) is connected to an ideal spring and is placed on a smooth horizontal surface. The spring is pulled to move the block and at an instant, the speed of end \(A\) of the spring and speed of the block were measured to be \(6 \mathrm{~m} / \mathrm{s}\) and \(3 \mathrm{~m} / \mathrm{s}\), respectively. At this moment the potential energy stored in the spring in increasing at a rate \(15 \mathrm{~J} / \mathrm{s}\). Find the acceleration of the block at this instant.
TS EAMCET 2019 Easy - Two wires \(A\) and \(B\) are of lengths \(40 \mathrm{~cm}\) and \(30 \mathrm{~cm}\). \(A\) is bent into a circle of radius \(r\) and \(B\) into an arc of radius \(r\). A current \(i_1\) is passed through \(A\) and \(i_2\) through \(B\). To have the same magnetic inductions at the centre, the ratio of \(i_1: i_2\) isTS EAMCET 2007 Hard
More PYQs from TS EAMCET
- The power of an electric motor is 242 W when connected to a 220 V supply. When the motor is operated at 200 V, the current drawn by it isTS EAMCET 2025 Medium
- A message signal of peak voltage 12 V is used to amplitude modulate a carrier signal of frequency 1.2 MHz . The amplitude of the side bands isTS EAMCET 2024 Easy
- When ' \(n\) ' identical mercury drops combine to form a single big dropTS EAMCET 2025 Medium
- A body travels in a straight line from point \(A\) to point \(B\) with an initial velocity zero and uniform acceleration, covering \(1 \mathrm{~m}\) during the first second and \(39 \mathrm{~m}\) during the last second. The distance between \(A\) and \(B\) in metre isTS EAMCET 2018 Easy
- To increase the length of a metal rod by \(0.4 \%\), the temperature of the rod is to be increased by
(Coefficient of linear expansion of the metal \(=20 \times 10^{-6}{ }^{\circ} \mathrm{C}^{-1}\) )TS EAMCET 2025 Easy - A small ball is thrown at an angle \(45^{\circ}\) to the horizontal with an initial velocity of \(2 \sqrt{2} \mathrm{~m} / \mathrm{s}\). The magnitude of mean velocity averaged over the first \(2 \mathrm{~s}\) is [talse, acceleration due to gravity, \(g=10 \mathrm{~m} / \mathrm{s}^2\) ]TS EAMCET 2018 Easy