TS EAMCET · Physics · Waves and Sound
Among the following statements, the correct statement for a wave is
- A Transverse waves cannot propagate through all media
- B Longitudinal waves can propagate through solids only
- C Transverse waves can propagate through solids
- D Longitudinal waves can propagate through vacuum
Answer & Solution
Correct Answer
(C) Transverse waves can propagate through solids
Step-by-step Solution
Detailed explanation
Transverse waves can propagate through solid.
See the Complete Solution
Get step-by-step explanations for this and 2.5 Lakh+ more JEE, NEET & CET questions.
- Unlock all solutions
- Practice the full chapter
- Track accuracy across PYQs
4.8 rated on Google Play · 14,000+ reviews
More questions from Physics
- Four resistors \(A, B, C\) and \(D\) form a Wheatstones bridge. The bridge is balanced, when \(C=100 \Omega\). If \(A\) and \(B\) are interchanged, the bridge balances for \(C=121 \Omega\). The value of \(D\) isTS EAMCET 2012 Easy
- Bulk modulus of water is \(2 \times 10^9 \mathrm{~N} / \mathrm{m}^2\). The pressure required to increase the volume of water by \(0.1 \%\) in \(\mathrm{N} / \mathrm{m}^2\) is :TS EAMCET 2003 Easy
- In a time ' \(t\) ', the amplitude of vibrations of a damped oscillator becomes half of its initial value, then the mechanical energy of the oscillator decreases byTS EAMCET 2024 Easy
- The ratio of the accelerations due to gravity at heights 1280 km and 3200 km above the surface of the earth is (Radius of the earth \(=6400 \mathrm{~km}\) )TS EAMCET 2024 Easy
- A block of mass 0.5 kg is at rest on a horizontal table. The coefficient of kinetic friction between the table and the block is 0.2 . If a horizontal force of 5 N is applied on the block, the kinetic energy of the block in a time of 4 s is (Acceleration due to gravity \(=10 \mathrm{~ms}^{-2}\) ),TS EAMCET 2024 Medium
- The modulation index used in amplitude modulation of a message signal of peak voltage \(10 \mathrm{~V}\) is 0.5 . By how much the peak voltage of the carrier signal be changed, so as to obtain the modulation index of 0.8 , keeping the peak voltage of the message signal same as before?TS EAMCET 2020 Easy
More PYQs from TS EAMCET
- Particle A (which was located at the origin at time \(t=0\) ) is moving along the \(\mathrm{x}\)-axis with a constant speed of \(1 \mathrm{~m} / \mathrm{s}\). Location of particle \(\mathrm{B}\) which is moving along the \(\mathrm{y}\)-axis is given by \(\mathrm{y}=\mathrm{ct}^2\), where \(\mathrm{c}=1 \mathrm{~m} / \mathrm{s}^2\). Find the speed of particle A relative to particle \(\mathrm{B}\) at \(\mathrm{t}=1 \mathrm{sec}\).TS EAMCET 2022 Easy
- A balance is made using a uniform metre scale of mass 100 g and two plates each of mass 200 g fixed at the two ends of the scale and the balance is pivoted at 45 cm mark of the scale. The error when 300 g weight is placed in the plate at 0 cm to weigh vegetables placed in the plate at 100 cm isTS EAMCET 2025 Medium
- Two metal rods \(\mathrm{A}\) and \(\mathrm{B}\) each of length \(50 \mathrm{~cm}\) and diameter \(4.0 \mathrm{~mm}\) are joined together at temperature \(30^{\circ} \mathrm{C}\). What is the change in length of the combined rod at \(230^{\circ} \mathrm{C}\) ? [Given linear expansion coefficients of rods A and B are respectively, \(2.0 \times 10^{-5} /{ }^{\circ} \mathrm{C}\) and \(\left.1.0 \times 10^{-5} /{ }^{\circ} \mathrm{C}\right]\)TS EAMCET 2022 Easy
- An observer moves towards a stationary source of sound with a speed \(\frac{1}{5} t h\) that of sound. The frequency of the sound emitted by the source is \(f\). The apparent frequency recorded by the observer isTS EAMCET 2023 Easy
- The output characteristics of an \(n-p-n\) transistor represent, ( \(I_C=\) collector current, \(V_{C E}=\) potential difference between collector and emitter, \(I_B=\) base current, \(V_{B B}=\) voltage given to base, \(V_{B E}=\) the potential difference between base and emitter)TS EAMCET 2014 Medium
- An object of height 3.6 cm is placed normally on the principal axis of a concave mirror of radius of curvature 30 cm. If the object is at a distance of 10 cm from the principal focus of the mirror, then the height of the real image formed due to the mirror isTS EAMCET 2025 Medium