TS EAMCET · Physics · Units and Dimensions
A gas satisfies the relation where is pressure, is volume and is constant. The dimensions of constant are
- A
- B
- C
- D
Answer & Solution
Correct Answer
(A)
Step-by-step Solution
Detailed explanation
Given, PV53=K Pressure P =ML-1T-2 Volume V=L3 ⇒ML-1T-2L35/3=K ∴ Dimensions of K=ML4T-2
See the Complete Solution
Get step-by-step explanations for this and 2.5 Lakh+ more JEE, NEET & CET questions.
- Unlock all solutions
- Practice the full chapter
- Track accuracy across PYQs
4.8 rated on Google Play · 14,000+ reviews
More questions from Physics
- Two masses \(m_1\) and \(m_2\) are placed on a smooth horizontal surface and are connected by a string of negligible mass. A horizontal force \(F\) is applied on the mass \(m_2\) as shown in the figure. The tension in the string isTS EAMCET 2016 Easy
- The heat required to convert 8 g of ice at a temperature of \(-20^{\circ} \mathrm{C}\) to steam at \(100^{\circ} \mathrm{C}\) is [Specific heat capacity of ice \(=2100 \mathrm{~J} \mathrm{~kg}^{-1} \mathrm{~K}^{-1}\), specific heat capacity of water \(=4200 \mathrm{~J} \mathrm{~kg}^{-1} \mathrm{~K}^{-1}\), latent heat of fusion of ice \(=336 \times 10^3 \mathrm{~J} \mathrm{~kg}^{-1}\) and latent heat of steam \(\left.=2.268 \times 10^6 \mathrm{Jkg}^{-1}\right]\)TS EAMCET 2025 Medium
- The dispersive powers of the materials of two lenses forming an achromatic combination are in the ratio of \(4: 3\). Effective focal length of the two lenses is \(+60 \mathrm{~cm}\) then the focal lengths of the lenses should beTS EAMCET 2012 Medium
- An iron bar having a cross sectional area of \(2 \times 10^{-5} \mathrm{~m}^2\) and magnetising field of \(2400 \mathrm{~A} / \mathrm{m}\) produce a magnetic flux of \(2.4 \pi \times 10^{-5} \mathrm{~Wb}\). What will be the value of permeability \((\mu)\) and susceptibility \((\chi)\) of the bar (Given \(\left.\mu_0=4 \pi \times 10^{-7}\right)\)TS EAMCET 2022 Hard
- A circular copper ring at \(30^{\circ} \mathrm{C}\) has a hole with an area of \(9.98 \mathrm{~cm}^2\). It is made to slip onto a steel rod of crosssectional area of \(10 \mathrm{~cm}^2\), by raising the temperature of both ring and rod simultaneously by an amount \(\Delta \mathrm{T}\). If the coefficient of linear expansion of copper and steel are \(17 \times 10^{-6} /{ }^{\circ} \mathrm{C}\) and \(11 \times 10^{-6} /{ }^{\circ} \mathrm{C}\), then minimum value of \(\Delta \mathrm{T}\) should beTS EAMCET 2022 Hard
- When a metal road of length \(l\) is placed in a magnetic field \(B\) and moved with velocity \(v\) perpendicular to the field, then the induced emf across its ends isTS EAMCET 2021 Easy
More PYQs from TS EAMCET
- Statement (S) : Using Huygen's eye-piece measurements can be taken but are not correct. Reason (R) : The cross wires, scale and final image are not magnified proportionately because the image of the object is magnified by two lenses, whereas the cross wire scale is magnified by one lens only. Identify the correct one of the followingTS EAMCET 2008 Easy
- A message signal is super-imposed with a carrier signal. The resulting modulating signal \(C_m(t)\) is given by \(C_m(t)=A_1 \sin \left(\omega_1 t\right)+A_2 \sin \left(\omega_2 t\right)-A_2 \sin \left(\omega_3 t\right) \text {, }\) where \(\omega_2 < \omega_1 < \omega_3\). The modulation index and the angular frequency fo the message signal respectively, areTS EAMCET 2020 Medium
- Three resistances of equal values are arranged in four different configurations as shown below. Power dissipation in the increasing order is



TS EAMCET 2012 Easy - The maximum tension a rope can withstand is \(60 \mathrm{~kg}\)-wt. The ratio of maximum acceleration with which two boys of masses \(20 \mathrm{~kg}\) and \(30 \mathrm{~kg}\) can climb up the rope at the same time isTS EAMCET 2011 Hard
- The graph between the input voltage \(\left(\mathrm{V}_{\mathrm{i}}\right)\) and the output voltage \(\left(\mathrm{V}_{\mathrm{o}}\right)\) of a transistor connected in common emitter configuration is shown in the figure. The active, saturation and cutoff regions of the transistor are respectively
TS EAMCET 2025 Medium - A car is moving on circular track banked at an angle of \(45^{\circ}\). If the maximum permissible speed of the car to avoid slipping is twice the optimum speed of the car to avoid the wear and tear of the tyres, then the coefficient of static friction between the wheels of the car and the road isTS EAMCET 2024 Medium