TS EAMCET · Physics · Semiconductors
The region in the output voltage versus input voltage graph where a transistor can be used as an amplifier is
- A active region
- B cut off region
- C saturation region
- D passive region
Answer & Solution
Correct Answer
(A) active region
Step-by-step Solution
Detailed explanation
The active region of a output characteristic of a transistor is used as an amplifier.
See the Complete Solution
Get step-by-step explanations for this and 2.5 Lakh+ more JEE, NEET & CET questions.
- Unlock all solutions
- Practice the full chapter
- Track accuracy across PYQs
4.8 rated on Google Play · 14,000+ reviews
More questions from Physics
- Water from a tap emerges vertically downwards with initial velocity \(4 \mathrm{~ms}^{-1}\). The cross-sectional area of the tap is \(A\). The flow is steady and pressure is constant throughout the stream of water. The distance \(h\) vertically below the tap, where the cross-sectional area of the stream becomes \(\left(\frac{2}{3}\right) A\), is \(\left(g=10 \mathrm{~m} / \mathrm{s}^2\right)\)TS EAMCET 2010 Medium
- An organ pipe with both ends open has a length \(L=25 \mathrm{~cm}\). An extra hole is created at position \(\frac{L}{2}\). The lowest frequency of sound produced is (assume, speed of sound \(=340 \mathrm{~m} / \mathrm{s}\) )TS EAMCET 2020 Medium
- Two radioactive materials \(X_1\) and \(X_2\) have decay constants \(10 \lambda\) and \(\lambda\) respectively. If initially they have the same number of nuclei, then the ratio of the number of nuclei of \(X_1\) to that of \(X_2\) will be \(1 / e\) after a timeTS EAMCET 2009 Easy
- A stone projected from the ground with a velocity \(50 \mathrm{~ms}^{-1}\) at an angle of \(30^{\circ}\) with the horizontal crosses a wall after a time of \(3 \mathrm{~s}\). Then the horizontal distance beyond the wall that the stone strikes the ground is \(\left(\right.\) acceleration due to gravity \(\left.=10 \mathrm{~ms}^{-2}\right)\)TS EAMCET 2023 Easy
- Two metal plates each of area ' \(A\) ' form a parallel plate capacitor with air in between the plates. The distance between the plates is ' \(d\) '. A metal plate of thickness \(\frac{d}{2}\) and of same area \(A\) is inserted between the plates to form two capacitors of capacitances \(C_1\) and \(C_2\) as shown in the figure. If the effective capacitance of the two capacitors is \(C^{\prime}\) and the capacitance of the capacitor initially is \(C\), then \(\frac{C^{\prime}}{C}\) is
TS EAMCET 2013 Hard - The symbol given below represents
TS EAMCET 2023 Easy
More PYQs from TS EAMCET
- A \(4 \mu \mathrm{F}\) capacitor is charged by a \(200 \mathrm{~V}\) battery. It is then disconnected from the supply and is connected to another uncharged \(2 \mu \mathrm{F}\) capacitor. During the process, loss of energy (in \(\mathrm{J}\) ) isTS EAMCET 2005 Medium
- A wooden block of outer volume 1 litre and specific gravity \(\frac{3}{4}\) having a cavity floats with half of its volume immersed in water. Then the volume of the cavity isTS EAMCET 2025 Medium
- A block kept on a frictionless horizontal surface is connected to one end of a horizontal spring of constant \(100 \mathrm{Nm}^{-1}\) whose other end is fixed to a rigid vertical wall. Initially the block is at its equilibrium position. The block is pulled to a distance of 8 cm and released. The kinetic energy of the block when it is at a distance of 3 cm from the mean position isTS EAMCET 2024 Easy
- The highest temperature, density and pressure is found on Earth:TS EAMCET 2019 Easy
- The de-Broglie wavelength of an electron with kinetic energy of \(320 \mathrm{eV}\) is \(\left(\right.\) Take \(\mathrm{h}=6.0 \times 10^{-34}\) SI unit, mass of electron \(=\mathrm{m}_{\mathrm{e}}\) \(=9.0 \times 10^{-31} \mathrm{~kg}\). Charge of an electron \(=1.6 \times 10^{-19} \mathrm{C}\) )TS EAMCET 2022 Easy
- Consider a particle on which constant forces \(\mathbf{F}_{\mathbf{1}}=\hat{\mathbf{i}}+2 \hat{\mathbf{j}}+3 \hat{\mathbf{k}} N\) and \(\mathbf{F}_{\mathbf{2}}=4 \hat{\mathbf{i}}-5 \hat{\mathbf{j}}-2 \hat{\mathbf{k}} N\) act together resulting in a displacement from position \(\mathbf{r}_1=20 \hat{\hat{i}}+15 \hat{\mathrm{j}} \mathrm{cm}\) to \(\mathbf{r}_2=7 \hat{\mathrm{k}} \mathrm{cm}\). The total work done on the particle isTS EAMCET 2017 Easy