MHT CET · Physics · Semiconductors
To get an output 1 from the logic circuit shown in the figure, the input can be
- A A=1, B=0, C=0
- B A=1, B=0, C=1
- C A=1, B=1, C=0
- D A=0, B=0, C=1
Answer & Solution
Correct Answer
(C) A=1, B=1, C=0
Step-by-step Solution
Detailed explanation
To get final output as 1 , the output of OR gate must be 1 and \(C\) must be 1 . So, \(A=1, B=1, C=0\)
See the Complete Solution
Get step-by-step explanations for this and 2.5 Lakh+ more JEE, NEET & CET questions.
- Unlock all solutions
- Practice the full chapter
- Track accuracy across PYQs
4.8 rated on Google Play · 14,000+ reviews
More questions from Physics
- Two wires A and B of equal lengths are connected in left and right gap of a metre bridge, null point is obtained at \(40 \mathrm{~cm}\) from left end. Diameters of the wires \(\mathrm{A}\) and \(\mathrm{B}\) are in the ratio \(3: 1\). The ratio of specific resistance of \(A\) to that of \(B\) isMHT CET 2020 Medium
- The instrument which works on the principle of mutual inductance isMHT CET 2012 Easy
- In a \(\mathrm{L}-\mathrm{R}\) circuit, the inductive reactance is equal to the resistance ' \(R\) ' in the circuit. An emf \(\mathrm{E}=\mathrm{E}_0 \cos \omega \mathrm{t}\) is applied to the circuit. The power consumed in the circuit isMHT CET 2023 Medium
- An a.c. source of \(15 \mathrm{~V}, 50 \mathrm{~Hz}\) is connected across an inductor (L) and resistance (R) in series R.M.S. current of \(0.5 \mathrm{~A}\) flows in the circuit. The phase difference between applied voltage and current is \(\left(\frac{\pi}{3}\right)\) radian. The value of resistance \((R)\) is \(\left(\tan 60^{\circ}=\sqrt{3}\right)\)MHT CET 2023 Hard
- A coil of ' \(n\) ' turns and radius ' \(R\) ' carries a current ' \(I\) '. It is unwound and rewound again to make another coil of radius \(\left(\frac{\mathrm{R}}{3}\right)\), current remaining the same. The ratio of magnetic moment of the new coil to that of original coil isMHT CET 2023 Medium
- In a given logic circuit, the output Y when all the three inputs \(\mathrm{A}, \mathrm{B}, \mathrm{C}\) are first low and then high will be respectively
MHT CET 2025 Easy
More PYQs from MHT CET
- Two wires \(A\) and \(B\) are stretched by the same load. The radius of wire \(A\) is double the radius of wire \(\mathrm{B}\). The stress on the wire \(\mathrm{B}\) as compared to the stress on the wire A isMHT CET 2020 Medium
- The mutual inductance of two coils is 45 mH . The self-inductance of the coils are \(\mathrm{L}_1=75 \mathrm{mH}\) and \(L_2=48 \mathrm{mH}\). The coefficient of coupling between the two coils isMHT CET 2024 Easy
- The enzymes required for ETS are arranged in/on ____.MHT CET 2022 Medium
- If the sum of the squares of the distances of a point \(P(x, y, z)\) from the three co-ordinate axes is 324 , then the distance of point \(P\) from the origin is ....MHT CET 2025 Easy
- The maximum value of isMHT CET 2017 Easy
- Identify non-benzenoid aromatic compound from the followingMHT CET 2022 Medium