MHT CET · Physics · Thermodynamics
Out of the following statements, which one is 'NOT' correct in the case of a thermodynamic process?
- A In an isothermal process, \(\Delta T=0\)
- B In an isobaric process, \(\Delta P=0\)
- C In an isochoric process, \(W=0\)
- D In an isothermal process, \(Q=0\)
Answer & Solution
Correct Answer
(D) In an isothermal process, \(Q=0\)
Step-by-step Solution
Detailed explanation
Concept-based.
In the isothermal process, the change in internal energy is zero. So, statement D is false.
In the isothermal process, the change in internal energy is zero. So, statement D is false.
See the Complete Solution
Get step-by-step explanations for this and 2.5 Lakh+ more JEE, NEET & CET questions.
- Unlock all solutions
- Practice the full chapter
- Track accuracy across PYQs
4.8 rated on Google Play · 14,000+ reviews
More questions from Physics
- An AC voltage source of variable angular frequency \(\omega\) and fixed amplitude \(V_0\) is connected in series with a capacitance \(C\) and an electric bulb of resistance \(R\) (inductance zero). When \(\omega\) is increasedMHT CET 2022 Medium
- A glass rod of radius ' \(r\) ' ' is inserted symmetrically into a vertical capillary tube of radius ' \(\mathrm{r}_2\) ' \(\left(\mathrm{r}_1 < \mathrm{r}_2\right)\) such that their lower ends are at same level. The arrangement is dipped in water. The height to which water will rise into the tube will be ( \(\rho=\) density of water, \(\mathrm{T}=\) surface tension in water, \(\mathrm{g}\) = acceleration due to gravity)MHT CET 2021 Hard
- In a thermodynamic system ' \(\Delta \mathrm{U}\) ' represents the increase in internal energy and 'W' the work done by the system. Which of the following statement is true?MHT CET 2024 Easy
- A thin uniform rod of length 'L' and mass 'M' is bent at the middle point ' 0 ' at an angle of \(45^{\circ}\) as shown in the figure. The moment of inertia of the system about an axis passing through '0' and perpendicular to the plane of the bent rod, is
MHT CET 2020 Easy - The depletion layer in \(\mathrm{p}-\mathrm{n}\) junction region is caused byMHT CET 2024 Easy
- A step-down transformer has turns ratio 20: 1 . If \(8 \mathrm{~V}\) is applied across 0.4 ohm secondary coil, then the primary current willMHT CET 2021 Medium
More PYQs from MHT CET
- Which of the following is a secondary allylic alcohol?MHT CET 2023 Easy
- The shortest distance between the line \(y-x=1\) and the curve \(x=y^2\) isMHT CET 2025 Hard
- If \(f(x)=\frac{x+2}{18},-2 < x < 4\)
\(=0 \quad, \quad\) otherwise,
is the p. d. f. of a r. v. X, then the value of \(\mathrm{P}(|\mathrm{X}| < 2)\) isMHT CET 2020 Medium - The temperature difference between two sides of metal plate, \(3 \mathrm{~cm}\) thick is \(15^{\circ} \mathrm{C}\). Heat is transmitted through plate at the rate of \(900 \mathrm{kcal}\) per minute per \(\mathrm{m}^2\) at steady state. The thermal conductivity of metal isMHT CET 2021 Hard
- What are the respective oxidation states of sulphur atoms numbered 1 to 4 in tetrathionate ion shown below?
MHT CET 2025 Medium - Find the depression in freezing point of solution when 3.2 gram non volatile solute with molar mass \(128 \mathrm{gram} \mathrm{mol}^{-1}\) is dissolved in 80 gram solvent if cryoscopic constant of solvent is \(4.8 \mathrm{~K} \mathrm{~kg} \mathrm{~mol}^{-1}\).MHT CET 2023 Medium