MHT CET · Chemistry · Polymers

Identify addition polymer from following

A Nylon-6, 6
B Polyester
C Orlon
D Urea formaldehyde polymer

Verified Solution

Answer & Solution

Correct Answer

(C) Orlon

Step-by-step Solution

Detailed explanation

Orlon is addition polymer and others are condensation polymers.

Apply the relevant identity from the chapter and substitute the values established in the previous step, keeping the original constraint in view.

Use the simplified expression to isolate the unknown, then plug the result back into the question setup to confirm the working is internally consistent.

Cross-check against a boundary or limiting case. Both the dimensional balance and the qualitative behaviour at the extreme should agree with the candidate answer.

Combine the steps above to identify the correct option. The remaining choices each fail at least one of the consistency, dimensional, or boundary checks.

Same subject

How many donor groups are present in diethylene triamine?

MHT CET 2020 Easy
In carbinol system isobutyl alcohol is named as

MHT CET 2021 Medium
Calculate Vant Hoff factor for $0.2 m$ aqueous solution of $K C l$ which freezes at $- {0.680}^{o} C . (K_{f} = 1.86 K k g {m o l}^{- 1})$

MHT CET 2019 Medium
What is the mass in grams of 0.25 mol water?

MHT CET 2025 Medium
Identify the catalyst used in the manufacture of high density polythene.

MHT CET 2020 Easy
Calculate the relative lowering of vapour pressure of solution containing 46 g of non volatile solute in 162 g of water at $20^{\circ} \mathrm{C}$.
[Molar mass of nonvolatile solute $=46 \mathrm{~g} \mathrm{~mol}^{-1}$ ]

MHT CET 2024 Medium

Explore more questions on app

From MHT CET

A potentiometer wire has length L for given cell of emf E, the balancing length is $\frac{L}{3}$ from the positive end of the wire. If the length of potentiometer wire is increased by $50 %$ , then for the same cell, the balance point is obtained at length

MHT CET 2019 Medium
Diseases present from birth are called ____________ .

MHT CET 2022 Medium
The excess pressure inside first soap bubble is three times that of a second soap bubble. The ratio of volumes of the first to second bubble

MHT CET 2025 Medium
Which among the following is NOT a pair of isomers?

MHT CET 2024 Medium
What should be the radius of water drop so that excess pressure inside it is $72 \mathrm{Nm}^{-2}$ ? (The surface tension of water $7.2 \times 10^{-2} \mathrm{Nm}^{-1}$ )

MHT CET 2021 Easy
A solid cylinder of length $\ell$ and cross-sectional area $\frac{\mathrm{a}}{5}$ is immersed such that it floats with its axis vertical at the liquid-liquid interface with length $\ell / 4$ in the denser liquid as shown in figure. The lower density liquid $(\varrho)$ is open to atmosphere having pressure $P_0$. The density d of solid cylinder is

MHT CET 2025 Medium

Explore more questions on app